Évaluations - 0, GPA: 0
(
)
)
|
Photos et spécifications Yamaha AES1500 |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
7 BRIDGE/SPRING TENSION ADJUSTMENTS ...................... 8 TRUSS ROD ADJUSTMENT ............................................... 9 PICKUP HEIGHT ADJUSTMENT ........................................ 9 CORRECT USE AND HANDLING OF BATTERIES ............. 10 Safety Precautions ............................................................ 11 CARE AND MAINTENANCE ................................................ 2 TUNING MACHINE TENSION ADJUSTMENT ...................... 3 HEIGHT ADJUSTABLE LOCKING NUT ............................... 3 SETTING THE STRING ACTION ......................................... 4 VIBRATO SYSTEM Vintage Type ........................................ 5 VIBRATO SYSTEM Locking Type (part 1) ........................... 6 CARE AND MAINTENANCE * When connecting or disconnecting cables, turn off the amplifier and other equipment or reduce the volume. Congratulations on your purchase of the YAMAHA electric guitar. * After playing, wipe the entire guitar down, including strings, With reasonable care, your YAMAHA elec- with a good polishing cloth. This will remove corrosive skin oils and acids, and protect the plating, finish, and strings. tric guitar will age gracefully and provide many years of superlative musical service. * Avoid exposing the guitar to direct sunlight and extremes of heat and humidity. 2 TUNING MACHINE TENSION ADJUSTMENT The tuning machines have spring-loaded mechanisms which automatically take up wear, preventing backlash. However, it is possible to adjust the amount of pressure required to turn the machines. Each machine has a tension adjustment screw, as illustrated. Loosen Tighten Clockwise screw rotation tightens the machine. The tuning machines should be adjusted to the extent that they are firm, but can turn smoothly. This adjustment is normally unnecessary, and excessive tightening can lead to premature tuning machine wear. 3 HEIGHT ADJUSTABLE LOCKING NUT 1) Remove 3 pcs. of hexagonal screws fixing the Lock Pads. (illustration — A) 2) Loosen 4 pcs. of screws fixing the Nut Base. (illustration — B) 3) Adjust the height by the Height Adjustment Screw. The Nut Base gets higher by clockwise rotation, and lower by counterclockwise rotation. (illustration — C) A C B NOTE: As the height has been adjusted in the best condition in the factory, please avoid the adjustment unless you have suitable experience. We suggest that you entrust this adjustment to your dealer. SETTING THE STRING ACTION — Bridge — NOTE: Be sure to perform any necessary adjustments to the truss rod before performing the following adjustments. String height refers to the space between the strings and frets, and has an affect on playability. String height is adjusted with the bridge and/or the saddle on the bridge. Adjust height by alternately turning the screws little by little on the left and right sides. Set too high and the instrument is hard to play. Too low results in fret noise. Adjust so that the space between the string and the last fret measures...
Ce manuel est également adapté pour les modèles :Instruments de musique - AES1500B (566.42 kb)
Instruments de musique - CV820 WB (566.42 kb)
Instruments de musique - PAC1611MS (566.42 kb)
Instruments de musique - PACIFICA012 (566.42 kb)