Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
. Moisture condensation may have occurred. Do not use the computer for at least 1 hour before turning it on. Getting help Getting help I cannot play a DVD- ROM . If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you 91 nNare trying to play is incompatible with the DVD- ROM drive in your notebook. The region code is listed on the packaging of the disc. . If you hear sound but cannot see video, your computer's video resolution may be set too high. For best results, change the resolution in Windows Control Panel - Display - Settings to 800 x 600 using 8-bit color. . If you see video but cannot hear sound, check all of the following: . Make sure the mute setting is off on your DVD player. . Check the master volume setting of the Audio Mixer. If you have connected speakers externally, check the volume settings of your computer speakers and check the connections between your speakers and the computer. . In the Device Manager, check that the correct drivers are installed properly. To display the Device Manager, click Start, point to Settings and click Control Panel. Double- click the System icon. On the Hardware tab, click the Device Manager button. . A dirty or damaged disc may cause the computer to ' hang' while it tries to read the disc. If necessary, reboot the computer, remove the disc and then check that it is not dirty or damaged. . On your computer, the default DVD region code is 2. Do not change this setting using the Region Code Change function in Windows ® , or using any other software applications. System malfunctions originating from the user changing the DVD region code, are beyond the scope of your warranty and will result in service charges for repair. My USB floppy disk drive cannot write to a diskette . The diskette is write-protected. Disable the write-protect feature or use a diskette that is not write- protected. . Check that the diskette is properly inserted into the floppy disk drive. . Your diskette may be corrupt. Try to insert another diskette. Getting help Getting help When I double-click an application icon a message such as 'You must insert the application CD into your 92 nNCD- ROM drive' appears and the software does not start. . Some titles require specific files that are located on the application CD- ROM. Insert the disc and try starting the program again. . Make sure you place the disc in the tray with the label side facing up. Why does my CD- RW drive not record at the highest speed? You must use 8x CD- R or 4x CD- RW media or higher to achieve optimum performance. If you want to use other media and are having difficulty formatting non- 4x CD-RW discs, change the writing speed from 4x to a lower setting. To change the writing speed from the default to a lower speed, proceed as follows: 1 Double-click the My Computer icon on the desktop. 2 Right- click the Compact Disc icon. 3 Select Properties. 4 Select the Settings tab. 5 Change the Current Write Speed field to 2x. 6 Click OK. . The VAIO notebook has a maximum recording rate of 8x for CD-R and 4x for CD-RW discs. The disc tray does not eject even when the eject button is pressed . Check that the notebook is turned on. . The application software when burning a CD may prohibit it. Getting help Getting help The disc tray ejects even when it has been locked into place . Ensure that the disc is placed with the label side facing up. . The disc may be scratched. Place another disc to see if that is the reason. 93 nN . There may be condensation in the drive. Remove the disc and leave the drive open for approximately one hour. About sound My speakers are not producing sound . The built- in speakers may be turned off. Press
Ordinateurs portables - PCG-GR114MK (2.28 mb)
Ordinateurs portables - PCG-GR114SK (2.28 mb)
Ordinateurs portables - PCG-GR214EK (2.28 mb)