Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
Pull hair back with one hand. Bring facepiece up to face with other hand. While holding the facepiece in place, pull the straps over your head. Tighten the two bottom straps. TA ■ Tighten the two top straps. Issue Date 01/01/04 Check the seal of your elastomeric full face, 4 strap respirator each time you don the respirator. 1. Positive Pressure User Seal Check Place the palm of your hand over the exhalation valve cover and exhale gently. The facepiece should bulge slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a tighter seal. If you cannot achieve a proper seal, do not enter the contaminated area. See your supervisor. 2. Negative Pressure User Seal Check Using Particulate Filters Place your thumbs over the center of the particulate filters and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a tighter seal. If you cannot achieve a proper seal, do not enter the contaminated area. See your supervisor. Using Cartridges Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a tighter seal. If you cannot achieve a proper seal, do not enter the contaminated area. See your supervisor. 3MTM Fitting Instructions for 3MTM Elastomeric Full Face 4 Strap Respirator 10007 page 2 of 2 Til WARNING These respirators help reduce exposure to certain airborne contaminants. Misuse may result in sickness or death. Before use, the wearer must read and understand User Instructions provided as a part of product packaging. Time use limitations may apply. For proper use, see package instructions, supervisor or call 3M OH&ESD Technical Service in U.S.A., 1-800-243-4630. In Canada, call 1-800-267-4414. Important Before using these respirators, you must determine the following: 1. The type of contaminant(s) for which the respirator is being selected. 2. The concentration level of contaminant(s). 3. Whether the respirator can be properly fitted on the wearer’s face. Do not use with beards, on other facial hair, or other conditions that prevent a good seal between the face and the faceseal of the respirator. 4. Before use of these respirators, a written respiratory protection program must be implemented, meeting all the requirements of OSHA29 CFR 1910.134, including training, medical evaluation and fit testing. 3 PNAT Co., Ltd. - 3M Authorized Distributor 207/65A1Nguyen Van Dau St., Binh Thanh Dist., HCM Tsl: 445-1937 Fax:515-0024 For more information, please contact: 3M Occupational Health and Environmental Safety Division (OH&ESD) 3MAuthorizedDistributor -PNAT A0., Ltd. 207/65A1 Nguyen Van Dau St., Binh Thanh Digt., HCMC Tel:445-1939 Fax:515-3924 SalesSupport: Me NguyanVaneiep E-mail:sales@pnat.com.vo Cell: 0X1-954-9440 Sales Director Mr. Neuye nDaugQuang E-mnil:quangdnguyen@pnat.com.vn Cell: he0-989-en88 TechnisaI SupcxP: Mr. Nguyen Minh Quang e-mail: n|m nguyed@p net.com.vn CelU 0dde88n-3g30 Customer Survice: Nguyoe TAi MeHong...