Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
Set the POWER switch to CAMERA. When placed in Record mode, the time and date will be recorded on the tape. _ Note:- | Only the Date and/or Time are recorded on the Tape. Press DISPLAY r___... -sp'l once to change the f DBIBKI Sp't REC display to date only. Press once or twice more to REC 1£0feMMI wMU tins remove the date/ time display. ^ M 1100S j Display-Off Mode This feature allows you to remove all Electronic Viewfinder Indications. Before inserting a tape, press DISPLAY and STOP together for more than one second to remove the indications except time and date*. To display the Electronic Viewfinder Indications again, turn the Palmcorder Power off and then on again. * To remove the time and date, see “Record the Date and Time’ above. 15 Electronic Viewfinder Indications © © © ITT71IH 1 H1gg^B“-ir8:SaiSLP|-|— ® I1/1QQQ01 I RECK-- rMFTCT VCR-MODE rFTToïïl 12:00:00AML U AN 1 1 9951 (5) Battery Remaining Indication (see page 15) 7*--Whon a battery recharge is necessary, “WARNING” will begin to flash in the EVF and “LOW BATTERY" will appear as the Power Lamp will also flash. The Palmcorder will automatically turn OFF in 15 seconds. ® Tape Remaining Indication • If the Palmcorder is in camera mode with no cassette tape inserted or the record tab is missing, “f§£i" will flash for one minute and “CHECK TAPE" will appear for 5 seconds, and recording will not start. • While recording, as the tape reaches to the end, “TAPE END" will appear for 5 seconds as a warning. (3) 10-Second Reminder An elapsed time indicator appears for one second every 10 seconds that recording continues. This is a reminder of how long you have been shooting a particular scene and can help keep your recordings fresh and interesting. 0:00 0:10 0:20 ..... 59:50 t_I (return to 0:00 and continue) • The 10-Second Reminder will be reset whenever you press Record/Pause. © TAPE SPEED Indication (see page 10) Indicates the tape speed (SP or SLP). © Operating Mode Indications REC (record) (RECORD will first appear in large characters for one second and then small characters.) PAUSE (PAUSE will first appear in large characters for one second and then small characters.) FF {fast forward) PLAY REW (rewind) 16 Electronic Viewfinder Indications (D © © © © “LLZ 1 QQQOI I REGI 1 M.F.LQ} -IVCR-MQDË 1 2:0O:OOA"mL JAN 1 1 9951 IF AD Eh © (D © Backlight Indication (see page 27). ® Manual Focus Indication (see page 26). © Fade Indication (see page 25). © Zoom Magnification level (see page 25). © High Speed Shutter Indication (see page 27). (D) VCR-MODE Indication “VCR-MODE” will appear for one minute if the POWER switch is set to VCR or the RECORD/PAUSE button is pushed in VCR MODE. © DEW Indication If excessive moisture condenses in the unit, “WARNING” and Power Lamp will flash, “DEW DETECTED” will appear, and the Palmcorder will automatically turn OFF in 15 seconds. In this case, wait until the indicator no longer flashes when your Palmcorder is turned on before using your Palmcorder again. © Date and time Indication (see page 13). 17 Attaching the Shoulder Strap Make sure the Battery Pack is not attached. Unthread the strap from the buckle. Thread the strap ends through the Strap Attachment Rings. min. 1 inch 1 Then thread the ends of the strap through the buckle. • Make sure the strap is not twisted. Adjust the Length Hand Strap to adjust the length. Adjust the length of the strap to the size of your hand as illustrated at left. 18 Camera Recording Simple Recording Tally Lamp Before you begin... • Connect the Palmcorder to a power source. • Insert a cassette with record tab (see page 10). Set the POWER switch to CAMERA. Built-In Lens Cover opens. EVF ^ PAUSE Record/Pause mode. With the Viewfinder Eye Cup up to your eye, adjust the Vision Adjustment Control to your eyesight. Slide the TAPE SPEED Selector to SP or SLP (refer to page 10). Press RECORD/PAUSE to start recording. The Tally Lamp and RECORD/PAUSE are lit during recording. Note: • Do not leave the Palmcorder with the EVF aimed directly at the sun as this may cause damage to the internal parts of the EVF. RECORD Press RECORD/PAUSE again ia pause recording. Set the POWER switch to OFF after recording is finished. • To remove the cassette In Record/Pause mode, slide the TAPE EJECT switch (refer to page 10). • When your Palmcorder is aimed at excessively bright objects, or bright lights, a vertical bar may appear in the picture. This is a normal characteristic of the CCD pick-up device. Try to avoid this when possible. 19 Basic Operation Camera Recording Stand-by Mode Whenever the Palmcorder has been in Record/Pause mode for 5 minutes, it will automatically go into Stand-by mode to conserve power. To resume recording, it is necessary to turn the Palmcorder POWER switch to OFF and then to CAMERA. Or, you may use the following feature to avoid having to turn the Palmcorder off and on again...