Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. Operator’s Manual SeekTech SR-60 Table of Contents GENERAL SAFETY INFORMATION........................................................................................................... 2 SR-60 COMPONENTS .................................................................................................................................. 5 INTRODUCTION TO THE SR-60........

The concepts and terminology can be quite unfamiliar if you are new to the hobby. To understand it quickly and to get the most enjoyment possible from your detector, we strongly recommend that you: 1) Watch the video. It is 21 minutes long. 2) Turn the Sensitivity knob to a low setting if you get false signals. A little practice is required to understand when and how you can use the sensitivity at or near 100%. 3) Do not use indoors. This detector is for outdoor use only. Many household applianc

The Pioneer 202 is a motion detector; movement over an object is required in order for the machine to detect the object and emit a tone. Alternatively, you can sweep a metal object over a motionless search coil. THIS METAL DETECTOR HAS TWO TYPES OF OPERATING MODES: 1. ALL METAL DETECTION All metals will be detected. 2. DISCRIMINATE, NOTCH, and AUTO NOTCH modes In any of these three detection modes, the detector will emit different tones, depending upon the type of metal present. The characterist

Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. • Francais – 33 • Castellano – pag. 67 NaviTrack® II NaviTrack® II Table of Contents Recording Form for Machine Serial Number and Software Version .........................................................................................................1 General Safety Information Work Area Safety ........................................................................

Suite 403 San Diego California 92121 Phone: (858) 558-3400 Fax: (858) 558-7050 Toll Free: (877) 97SCOPE MD9200 Owner’s Manual EASY ASSEMBLY MD9200 assembly is easy, and it requires no special tools. The only assembly required is to attach the search coil and lower stem to the upper stem and on to the control box. Fresh batteries can then be installed, and the detector will be ready for use. Please use the following steps for assembly: 1. Depress the button on the single stem, and push it

Text Box: Notes: ? The search coil will not detect without motion. You must move the object since you are not sweeping with the detector at this time. ? If you are suing a coin, the detects it more easily if you hold it so a flat side is parallel with the flat side of the search coil (not the edge). If the detector detects the material, it sounds a tone and the pointer moves to the left (ferrous) or to the right (non-ferrous) while the detector determines the type of meal it is detecting. If the

(The search coil should be parallel with the ground.) Tighten the knobs just enough to keep the search coil from rotating or wobbling. INSTALLING BATTERIES You need six AA batteries to power your detector. Cautions: ? Use only fresh batteries of the required size and recommended type. ? Do not mix old and new batteries, different types of batteries (standard, alkaline, of rechargeable), or rechargeable batteries of different capacities. Text Box: ADJUSTING THE STEM Follow these steps to adjust t

1 Condensed Operating Instructions ........................................pg. 2 Factory Preset “Turn-On-And-Go” Marks ..............................pg. 2 Setting Up ..................................................................................pg. 3 Hipmounting .............................................................................pg. 5 Control Panel ............................................................................pg. 5 Turn-On Procedure .....................................

1 Condensed Operating Instructions .................................. pg. 2 Setting Up ............................................................................... pg. 3 Controls & Functions ........................................................... pg. 5 All Metal Mode ....................................................................... pg. 7 Iron Disc Mode ...................................................................... pg. 8 Normal Disc Mode ......................................

Our detectors are durable, dependable, and search deeper.. REPUTATION Fisher produced the first patented metal detector in 1931. For over 70 years, the Fisher logo has been a mark of excellence. 5 - YEAR LIMITED WARRANTY Fisher believes in the products we produce and backs this belief with a 5 year limited warranty. Warranty may vary outside of the United States. See your dealer for details SERVICE Fisher is committed to providing you, our valued customer, with superior service. Each and every i