Log:
Évaluations - 5, GPA: 4 ( )

Instructions Altec Lansing, Modèle 15 Oak

Fabricant : Altec Lansing
Taille : 785.37 kb
Nom Fichier : 63774e5f-2b38-4d1c-b40c-14bc51560c0b.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Baffle angle of the monitor may be adjusted by raising or lowering one pair of supporting chains at the anchor points. Figure 1 illustrates a typical ceiling-mounted system. When the cabinet is hung ‘bass-side-up’, the network/ equalizer assembly may be removed, rotated 180 degrees, and reinstalled to maintain a right-side-up orientation. Optional Mounting Base If the discriminating listener wishes to use the Studio Monitor Speaker System in the home environment, the optional mounting base may be secured to the bottom of the cabinet. To install the optional mounting base, position your Studio Monitor Speaker System on one side or the top, using a carpeted surface to protect the finish of the cabinet. DO NOT lay the system on its front side, because the grille coverings may be damaged. Position the base against the bottom of the cabinet, rubber feet facing outward, aligning the pilot screw holes. Install the supplied screws (No. 8 x 2Vz" for Model 19 and No. 10 x 11/2" for Model 15 to secure the base to the cabinet. Tighten all screws. Altec Studio Monitor Speaker Systems are designed to meet the stringent specifications of extended frequency response, low distortion and wide dynamic range that are required for use in recording and broadcasting studios. The bass loudspeaker (woofer) produces extended low-frequency response even when driven at exceptionally high power levels. Two frequency adjustment controls (high and mid-range) are provided to adapt the Studio Monitor Speaker Systems to a wide range of acoustic environments, including audition rooms, recording studio control room monitoring, remix studios, mastering rooms, broadcast studio monitoring and playback, auditoriums, nightclubs, conference rooms, theaters, churches, and other professional applications. All of these Studio Monitor Speaker Systems combine excellent overall bandwidth, low distortion, uniform dispersion and extended frequency response. Major differences between the larger (Model 19 and smaller (Model 15 systems are sensitivity, acoustic output and enclosure size. For applications where sensitivity and acoustic output are of major importance, the larger Model 19 should be used. Where space is at a premium and slight reduction in sensitivity and acoustic output is not detrimental, the smaller Model 15 becomes the logical selection. Wall or Ceiling Mounting For many professional applications the Studio Monitor Speaker System is hung or suspended from a wall or ceiling. A recommended type of installation utilizes four 1/t "-20 eyebolts which are secured in the sides of the cabinet with flat washers and nuts. The low-frequency loudspeaker must be removed to install the eyebolts. The Studio Monitor Speaker System is then suspended by the four eyebolts with a lightweight chain (200-pound pull) from anchor points in the wall Figure 1. Suspended Studio Monitor Speaker System ALTEC Specifications and components subject to change without notice. Overall performance iei!l he ...

Ce manuel est également adapté pour les modèles :
Haut-parleurs - 19 Oak (785.37 kb)
Haut-parleurs - 19 Walnut (785.37 kb)
Haut-parleurs - 15 Walnut (785.37 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories