Évaluations - , GPA: ( )

Instructions Atlas Sound, Modèle B SERIES EZB51-4

Fabricant : Atlas Sound
Taille : 71.22 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Factory assemblies shall be comprised of an Atlas Sound Model FC104, 4” high compliance loudspeaker or FA134, 4” coaxial loudspeaker, 70.7/25V or 70.7V transformer and baffle. Models including high compliance Model FC104 Loudspeaker shall have wide angle sound distribution with 135° dispersion (-6dB, 2 kHz octave band). The cone shall be a damped, high compliance type with smooth extended response over a range of 150 Hz to 17 kHz and a power rating of not less than 10 watts program. The magnet shall be a 10 ounce (283g) ceramic type. The 1” (25mm) voice coil shall operate in a magnetic field of at least 10,500 gauss. Voice coil impedance shall be 8 ohms. Sensitivity shall be 94dB [measured 1W/1M]. Free air resonance shall be 101 Hz. Model including high Model FA134 Coaxial Loudspeaker shall have wide angle sound distribution with 130° dispersion (-6dB, 2 kHz octave band). The cone shall be a damped, polypropylene type with smooth extended response over a range of 110 Hz to 20 kHz and a power rating of not less than 15 watts program. The magnet shall be a 10 ounce (283g) ceramic type. The 1” (25mm) woofer voice coil shall operate in a magnetic field of at least 11,300 gauss. High frequency device shall be a 1” (25mm) PEI tweeter. Crossover frequency shall be 8000Hz. Nominal impedance shall be 8 ohms. Sensitivity shall be 88dB [measured 1W/1M]. Free air resonance shall be 80 Hz. Loudspeaker shall include a pre-mounted ____ (70.7/25V or 70.7V) transformer with power taps of ____ (.25, .5, 1, 2, 4 – LT72, .5, 1, 2, 4 – HT47). Transformer frequency response shall be ____ (+/- 1.5dB @ 100 Hz to 10KHz – LT72 or +/-1dB @ 60 Hz to 12 KHz-HT47). Insertion loss shall not exceed ____ (+1.5dB-LT72 or +1dB-HT47). Assemblies without support rails shall mount to enclosure Model ____ or mounting ring Model ____ or tile bridge Model ____ or approved equal. Enclosures shall be Model __________ (96-4, 96-4X, 198-4) and shall be listed by Underwriters Laboratories (UL 1480 General Signaling and accepted under UL 2043 for use in air handling “plenum” spaces). Assemblies with support rails shall include pre-mounted brackets and shall transfer the loudspeaker package weight to the ceiling system support rails. Specifications subject to change without notice AtlasSound.com 1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435 © 2004 Atlas Sound Printed in U.S.A. 000904 ATS001653 RevC 9/04 SL1-1368 ...