|
Photos et spécifications Yamaha NS-C310 |
Facilité d'utilisation
• Do not insert the insulation into the hole. Sound may not be produced. ¦When using a banana plug Note Do not take off this cover unless using a banana plug. Banana plug Cover 1 Remove the cover by pulling it toward you. 2 Tighten the terminal knob. 3 Simply insert the banana plug into the terminal. • Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable. • Connect the (+) terminals on the amplifier (or receiver) to the (+) terminal of each speaker, making sure to confirm the color- coded wire of the cable at each end. Use the other wire of the cable to connect the (–) terminals of the components. • Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity the sound will be unnatural and lack bass. English 3 En REMOVING THE FRONT COVER SPECIFICATIONS REMOVING THE FRONT COVER SPECIFICATIONS The front cover is attached to protect the speaker, but you can remove it if necessary. The front cover is fixed by magnets. Hold the speaker with one hand, and pull the front cover gently with the other to remove it. NS-B310 NS-C310 Notes • When removing the cover, be careful that you don't touch the drive units, and don't exert excessive force with any tools. • There are magnets on the reverse side of the front cover. Do not place a front cover close to objects that might be affected by magnets, such as CRT TV, clock, magnetic card, diskette, etc., after removing it. NS-B310 Type .................... full-range acoustic suspension speaker system Non-Magnetic shielding type Driver.......................................8 cm (3-1/8”) cone full-range . 2 Impedance............................................................................... 6 . Frequency Response ............................80 Hz to 35 kHz (-10 dB) to 50 kHz (-30 dB) Nominal Input Power........................................................... 40 W Maximum Input Power ...................................................... 120 W Sensitivity ........................................................... 87 dB/2.83 V/m Dimensions (W . H . D)............................ 107 . 200 . 127 mm (4-3/16” . 7-7/8” . 5”) Weight............................................................1.6 kg (3 lbs. 8 oz.) NS-C310 Type .......................... 2-way acoustic suspension speaker system Non-Magnetic shielding type Driver ...................................... 6.5 cm (2-9/16”) cone woofer . 4 3 cm (1-3/16”) soft dome tweeter Impedance............................................................................... 6 . Frequency Response ........................... 90 Hz to 45 kHz (-10 dB) to 100 kHz (-30 dB) Nominal Input Power........................................................... 40 W Maximum Input Power ...........................................
Ce manuel est également adapté pour les modèles :Haut-parleurs - NS-B310 (1.08 mb)