Log:
Évaluations - 4, GPA: 4 ( )

Instructions Samsung, Modèle DA-E750

Fabricant : Samsung
Taille : 9.41 mb
Nom Fichier :
Langue d'enseignement: itenfrde
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


4. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the or icon appears in the display. • Each time you press the button, the selection changes as follows : ; ; ; ; ; ; aUX (LeD Off) 5. The or indicator lights up in red, and changes to solid white once the Wireless Audio with Dock connects to the router. . If you connected the LAN cable when the product is on, turn the product off, then turn it on again. . If failed to connect to the network, unplug the LAN cable and connect it again, and restart the product. . xDSL user needs a router to make a network connection. to connect the Wireless Audio with Dock to a Wireless network This section describes 4 methods of connecting the Wireless Audio with Dock to a wireless network. . Some of network related operations may be different than explained depending on performance and supported functions of used AP. . To configure the network connection to your router or modem, see the router or modem's user manual. . The Wireless Audio with Dock supports the following security protocols: -WEP ; Open -WPA-PSK ; TKIP -WPA2-PSK ; AES . You can also connect the Wireless Audio with Dock to a network that does not have security and has no password. . If your wireless router supports DHCP, this Wireless Audio with Dock can use a DHCP or static IP address to connect to the wireless network. . Select a channel on the wireless router that is not currently being used, if the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure. . If you select the Pure High-throughput (Greenfield) 802.11n mode and set the encryption type on your router to WEP or TKIP, then the Wireless Audio with Dock will not support a connection in compliance with new Wi-Fi certification specifications. . Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference with other radio devices, etc) . WPS(PBC) / WPS(PIN) does not operate when the security protocol is set to WEP. . If you fail to set up the network, press and hold the WPS/reSet button on the rear panel until the or indicator blinks twice. Wait until the red light stops blinking, turn off and on the unit. And try again. to connect the Wireless Audio with Dock to your Apple device having iOS 5.0 or above (info Sharing) This network set-up method is for users of Apple devices that have iOS 5.0 or later. 1. Connect the Apple device to your network. 2. Select on the Wireless Audio with Dock, and then connect the iPod /iPhone /iPad device to the Dual Dock. 3. Press and hold the WPS/reSet button on the rear panel of the Wireless Audio with Dock with a pen tip or similar item for more than 1 second. The icon will blink once. Release the buttom. 4. Select in the pop-up menu on the display of the Apple device. 5. Change the mode to the and then the indicator will blink in red and changes to solid white. After the Wireless Audio with Dock connects, the indicator stops blinking in red, and glows in white. • The network connection is complete. 17 EnG . connEctions to connect the Wireless Audio with Dock using WPS (PBc) 1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the or icon appears in the display. • Each time you press the button, the selection changes as follows : ; ; ; ; ; ; aUX (LeD Off) The indicator changes from white to red and blinks. 2. Press and hold the WPS/reSet button on the rear panel with a pen tip or similar item for more than 1 second. The indicator blinks once in white. After the indicator blinks, release the button. • The indicator blinks in red. 3. Push the WPS/reSet button on your router or modem within 90 seconds. 4. After the Wireless Audio with Dock connects, the or indicator changes from blinking red to white. • The network connection is complete. PUSH WPS / RESET AUX IN ONLY FOR SERVICE LAN USB 5V 500mA POWER PUSH WPS / RESET AUX IN ONLY FOR SERVICE LAN USB 5V 500mA POWER DOCK PUSH WPS / RESET AUX IN ONLY FOR SERVICE LAN USB 5V 500mA POWER PUSH WPS / RESET AUX IN ONLY FOR SERVICE LAN 18 To connect the Wireless Audio with Dock through a JBC (JukeBox Connect) Connection 1. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the or icon appears in the display. • Each time you press the button, the selection changes as follows : ; ; ; ; ; ; AUX (LED Off) The indicator changes from white to red and blinks. 2. Press and hold the WPS/RESET button on the back panel with a pen tip or similar item for more than 5 seconds. The indicator blinks in white once. Wait until the indicator blinks in white twice more, and then release the WPS/RESET button. • The indicator blinks in red, and then stops blinking and glows in red when the unit accesses the Network Setting mode. 3. To connect the Wireless Audio with Dock to the network, search for "Samsung W_Audio E750 XXXXXXX" ...

Ce manuel est également adapté pour les modèles :
Haut-parleurs - DA-E751 (9.41 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories