Évaluations - 5, GPA: 4
(
)
)
|
Facilité d'utilisation
–A device featuring the Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. – Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. • Depending on the device to be connected, it may require some time to start communication. Notes when using with a mobile phone • You cannot use this unit to talk over the telephone, even if the Bluetooth connection between this unit and a mobile phone is made. • For details on operation of your mobile phone when receiving a telephone call while transmitting the sound using the Bluetooth connection, refer to the operating instructions supplied with the mobile phone. Continued On safety The nameplate indicating Sony trademark, model number and electrical rating is located on the bottom exterior of this unit. • Before operating the system, be sure that the operating voltage of the system is identical with that of your local power supply. Where purchased Operating voltage All countries/regions 100 – 240 V AC, 50/60 Hz • Use only the supplied AC power adaptor. • The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. On placement • Do not set the speaker in an inclined position. • Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock. On operation • Do not open the cabinet. Refer servicing to qualified personnel only. • Should any solid object or liquid fall into the system, have the system checked by qualified personnel before operating it any further. • Although this system is magnetically shielded, do not leave recorded tapes, watches, personal credit cards, or floppy disks with magnetic coding in front of the system for an extended period of time. On cleaning Do not use alcohol, benzine, or thinner to clean the cabinet. If the TV picture or monitor display is magnetically distorted Although this system is magnetically shielded, there may be cases that the picture on some TV sets/personal computer sets may become magnetically distorted. In such a case, turn off the power of the TV set/personal computer set once, and after 15 to 30 minutes turn it on again. For the personal computer set, take the appropriate measures such as data storage before turning it off. When there seems to be no improvement, locate the system further away from the TV set/personal computer set. Furthermore, be sure not to place objects in which magnets are attached or used near the TV set/personal computer set, such as audio racks, TV stands, toys etc. These may cause magnetic distortion to the picture due to their interaction with the system. Others • If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer. • Should any problem persist, consult your nearest Sony dealer. Troubleshooting If you run into any problems using this unit, use the following checklist. Should any problem persist, consult your nearest Sony dealer. Common No sound , Check that both this unit and the source device are turned on. , Turn up the volume of the unit. , Turn up the volume of the source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the device. , Make sure all the connections have been correctly made. Low sound level , Turn up the volume of the source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the device. , Turn up the volume of the unit. Distorted sound , Turn down the volume of the source device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the device. , If the source device has a bass boosts function, set it to off. , Turn down the volume of the unit. There is hum or noise in the speaker output. , Make sure all the connections have been correctly made. , Make sure none of the audio devices are positioned too close to the TV set. The brightness of the power indicator is unstable. , The brightness of the power indicator may become unstable when the volume is turned up. This is not malfunction. When using the Bluetooth connection No sound , Ensure that this unit is not too far from the Bluetooth stereo audio source device, or this unit is not receiving interference from a wireless LAN, other 2.4 GHz wireless device, or microwave oven. , Check that the Bluetooth connection is made properly between this unit and the Bluetooth stereo audio source device. , Pair this unit and the Bluetooth stereo audio source device again. Sound skips or the correspondence distance is short. ...