Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Use it
31Playing audio from smart device
3 Playing WMA/MP3 audio from microSD card*
Organizing audio files on microSD card using a computer
4 Recording audio*
5 Answering and recording calls
(for Windows OS)
NOTE
Stream audio from your smart device wirelessly.
Plays MP3, WMA and WAV format audio from a microSD card.
You can record audio from the speaker or using the
Only start the recording session
When your Bluetooth smartphone is connected to the Sound Blaster Roar, you can answer
1. Connect your smart device via one-touch NFC pairing or manual Bluetooth pairing.
built in microphone.
after the RED LED turns from
and record calls with the speaker.
2. Play your music from your smart device!
blinking to steady red.
The microSD card player plays files according to the order in which they were being copied^. To
* Feature only works when a microSD card is inserted into the speaker
1. While the speaker is powered ON,
retain the order of the audio files that are transferred from your computer to your microSD card,
To answer calls
2 Playing audio from computer (USB audio)
insert a microSD card into the speaker.
we recommend that you follow these steps below.
To record from the microphone
1
2
L
S
1. Organize the audio files in a folder in the order that you would like them to appear on the
Press Multifunction button once.
You can choose to hear audio from your computer through the
2. Play your music via controls on the
REC
microSD card. Close the folder.
Simply slide the slider switch to the Mic On position
speaker when it is connected via a USB cable.
speaker.
and press the Record button to record.
2. Reopen the folder and click on an empty space in the window to ensure that no file is being
To reject calls
1. Connect the speaker to your computer via the USB cable.
selected.
Press Record button to stop anytime.
Press and hold Multifunction button for
2. Press and hold Play / Pause button until you hear a tone.*
Action
Step
3. Press (Ctrl + A) to select all the files in that folder.
more than 2 seconds.
This signifies that the Sound Blaster Roar has switched from
4. Copy them (Ctrl + C) and paste them (Ctrl + V) to your microSD card.
Play / Pause MP3 Audio
USB Mass Storage Device to USB Audio Device.^
Press Play / Pause button.
To record from Aux-in and Bluetooth source
This ensures your files are copied to the microSD card in your desired order.
To record calls
* If no tone is heard, disconnect the cable from the computer,
Repeat Folder
Press and hold Play / Pause button while music is playing.**
REC
Simply slide the slider switch to the Mic Mute
Press Record during a call.
and start from Step 1 again.
position and press the Record button to record.
Hello
Previous / Next Track
Press Previous / Next button once while music is playing.
NOTE:
The conversation will be saved in the
3. Play your music on your computer!
After opening the folder in step 2, we recommend that you do not click on any file. This is because
Press Record button to stop anytime.
Previous / Next Folder
Press and hold Previous / Next button while music is playing.
VOICE folder on the microSD card.
NOTE:
OR
the Windows operating system will reproduce the files in the destination folder beginning with the
●
Press Previous / Next when playback is stopped.
file that you have first clicked, which may lead to confusion. Drag and drop file / folder has similar
If no audio is heard:
complications.
To playback your recorded tracks
For Windows
Shuffle / Repeat All Tracks
Slide the switch to Shuffle to play tracks in random order.
REC
Click volume control and select Sound Blaster Roar as your output device.
Slide the switch to Repeat All to repeat all tracks in
Simply press the Play / Pause (REC) button and
continuous order.
The file transfer behavior on other operating systems or media players may differ. To ensure your
use the Next or Previous button to navigate
For Mac
files are played back in a particular sequence, transfer the files one by one in the desired order.
between recorded tracks.
1. Go to System Preferences and click Sound.
2. Click the Output tab and select Sound Blaster Roar.
* Feature only works when a microSD card with MP3, WMA or WAV audio files is inserted into the
NOTE:
●
● USB audio will disconnect if Play / Pause button is pressed during USB audio mode.
speaker. Supports up to 32GB microSD card. All microSD and microSDHC cards are supported
Recording from microphone also records the audio coming out from Bluetooth and Aux-in audio sources.
●
for audio playback. For recording, we recommend that you use Class 4 or higher.
Audio recording is saved in WAV format in the VOICE folder.
NOTE:
^ Depending on your operating system, a pop-up message may appear informing you that
● For recording, a Class 4 microSD/SDHC card is recommended.
** Pressing Play / Pause in repeat folder mode will cancel repeat folder mode and resume normal
● Make sure the speaker's microphone is switched on.
the Mass Storage Device has not been ejected properly. This is normal and not disruptive
● It is a good practice to use a new microSD card for recording.
playback order.
^ The order of music playback is based on the order of the first file copied into the microSD card.
● To record calls, make sure a microSD card is inserted into the speaker.
to your microSD card.
● Simultaneous WMA / MP3 audio playback using microSD card and audio recording is not supported.
Unlocking the World of
FAQ
4
Technical Specifications
Sound Blaster
Bluetooth Version: Bluetooth 3.0
Perform the following trouble-shooting steps before sending it for servicing. For more information, please refer to
Bluetooth link is established either by NFC or Manual pairing between the devices but there’s no music.
To Enable Power saving mode with power adapter attached:
Operating Frequency: 2402 - 2480 MHz
www.creative.com/support.
What should I do?
1) Ensure that the speaker is powered ON and not connected to any other devices
Lithium Ion Battery: 6000mAh
2) Press the Power and Volume “+“ button together. The LED status indicator will flash once to indicate power
● If the device you have paired is the 2nd device connected to the speaker, with the 1st device currently streaming
1. Connect the speaker to your computer via the USB cable.
The Sound Blaster Roar SR20 cannot be powered on. What should I do?
saving feature is enabled.
USB Input: 5V 500 - 1000mA
music, you would need to stop playing music on the 1st device to allow music streaming on the 2nd device.
● Ensure that there is enough battery power on the speaker and there should be at least one lit LED on the
DC Output: 5V 1000mA
2. Press and hold Play / Pause button until the speaker is recognized as an Audio Output
** With some built-in Bluetooth enabled computers, 3rd party USB Bluetooth dongles or other devices, you may be
battery indication LED.
Note: The speaker will enter Power saving mode after approximately 15 minutes of inactivity when it is running
Power Consumption during standby/off : < 0.5W
device on your computer.
required to manually specify/set-up the audio output as SB ROAR SR20.
● Connect to a power source using the supplied power adapter or the supplied USB cable (from a computer or
off its internal batteries. This feature helps to protect the internal battery and cannot be disabled.
Power Consumption when Bluetooth linked and/or USB connected without music streaming (networked
(For example, under sound and audio devices section on your computer’s settings)
standby) : < 3.0W
3. Install the Sound Blaster Control Panel on your computer.
laptop USB port) and try to power it on again.
What do I do if I find that the speaker is not behaving the way it should?
Please consult your manufacturer’s documentation for further information.
The unit is preset with auto power down function, details to refer to FAQ.
● The internal battery may be empty. Connect to the supplied power adapter or the supplied USB cable and
● Should any of the above happens, we would recommend that you master reset the speaker.
i. Visit www.soundblaster.com/downloads/SBCP.
charge it for about 1 hour before attempting to power it ON again.
How do I disable Voice Prompt?
In any state, press and hold the Power button for more than 10 seconds then press the Power button again to
!
ii. Under Downloads, click to download the appropriate package for your
Power Adapter Information
● With the speaker powered ON, press both Volume “–“ and Multifunction Button at the same time.
There’s no Bluetooth link between my device and the Sound Blaster Roar. What should I do?
turn on the speaker.
Brand: Creative
operating system.
A prompt is heard indicating voice prompt is disabled.
●
Model Number: GPE024W-150160-Z
Ensure that your Bluetooth enabled device supports A2DP profile. Refer to its user’s manual on how to enable
Alternatively
iii. Locate and launch the downloaded file.
Input: 100-240VAC 50/60Hz 0.75A
(turn on) the Bluetooth functions and its capabilities.
How do I enable Voice Prompt?
You can perform a factory master reset to clear paired device list.
Output: 15VDC 1.6A
iv. Setting the default audio device.
● On a speaker with disabled voice prompt, ensure that it is powered ON. Press both Volume “+“ and Multifunction
You may also try the following:
1) Ensure your speaker is not connected to any Bluetooth device.
Operating Temperature range: 0ºC to 45ºC
Button at the same time. A prompt is heard indicating voice prompt is enabled.
a. For Windows
● Delete the SB ROAR SR20 name entry from your Bluetooth device paired memory list and perform the steps in
2) With your speaker powered on, Press and hold the Multifunction button until the white Led blinks rapidly.
Supported Bluetooth profiles*:
Press and hold the Multifunction button and Volume “-“ button until a voice prompt is heard indicating the
A2DP (Wireless Stereo Bluetooth), AVRCP (Bluetooth Remote Control), HFP (Handsfree profile)
This setting will be automatically configured
Connect it (One-touch NFC pairing or Manual Bluetooth pairing) to re-pair your device with Sound Blaster Roar
Why is my speaker unable to power off automatically after 15 mins of inactivity?
ed
speaker has been master reset and returned to pairing mode.
Supported Codec: SBC, aptX, AAC
after Sound Blaster Control Panel is installed.
SR20.
● Please ensure that there are no Bluetooth devices connected to the speaker and that the Aux-in does not have a
alled.
Operating Range: Up to 10 meters, measured in open space.
● Ensure that both your Bluetooth device and Sound Blaster Roar SR20 are not connected to any other devices.
music / noise signal on it. Please also ensure that that the speaker is also not in the following modes:
Why do I hear beep tones when I disable voice prompts?
Walls and structures may affect range of device.
● On some Bluetooth device, you may need to select SB ROAR SR20 as your default output device after pairing
- Loud Sounds Mode (see Handy Guide, pg 12)
The beep tones are meant to be indicators for the following items:
b. For Mac
Supports microSD cards of Class 4 and above, up to 32GB in FAT16/32 format
is complete**.
- Audio playback from microSD card
Supported audio formats: MP3, WMA and WAV
1. Go to System Preferences and click Sound
Sou
.
- Recording onto microSD card
1 Beep tone
Feature activated indicator
nd.
Records audio, voice or mobile calls at 16k, ADPCM WAV format.
I am unable to pair to my Bluetooth NFC-enabled device
2 Beep tone
Feature confirmation indicator
2. Click the Output tab and select
Please note that power is supplied through the connected USB cable via DC out (USB output) whenever a device is
●
Error indicator
Note: Compliance markings are located on the bottom of this product.
Ensure that NFC is turned on for your device. For information on how to turn on NFC, please consult the
3 Beep tone
Sound Blaster Roar.
attached to the speaker even when the speaker is OFF.
* Refer to your Bluetooth device (notebook¹, PC¹, or mobile device²) manufacturer’s documentation/website for
documentation found on your NFC-enabled device.
Additional Power Saving Features
supported profiles.
● Ensure that both your NFC-enabled device is not connected to any other Bluetooth devices and that the Sound
For better user connectivity experience, the Sound Blaster Roar will now by default automatically enter power saving
¹ Compatible with PC (Windows XP/Vista/7/8/8.1), Apple Macintoshes equipped with Bluetooth wireless stereo.
Blaster Roar SR20 is not connected to two Bluetooth devices and try again.
mode only after approximately 28 hours of inactivity when the power adapter is attached via a main outlet to the
² Compatible with most major brands of Bluetooth A2DP enabled mobile phones.
speaker. However, you have the option to keep the power on permanently if needed.
Note:
Compatibility Disclaimer
Wireless performance is dependent on your device’s Bluetooth wireless technology. Refer to your device
The Creative Sound Blaster Roar SR20 can connect to a maximum of 2 stereo Bluetooth devices at any given
To Disable Power saving mode with power adapter attached (For keeping your speaker ON permanently):
manufacturer’s manual.
time and will reject the 3rd device connecting via NFC or Bluetooth until one Bluetooth device is disconnected.
1) Ensure that the speaker is powered ON and not connected to any other devices
Creative will not be liable for any lost of data or leakages resulting from the use of these devices.
NOTE:
● If you are encountering NFC pairing issues with only one Bluetooth device connected, please pause the music
2) Press the Power and Volume “-“ button together. The LED status indicator will flash once to indicate power saving
Product Registration
The Sound Blaster Control Panel requires the speaker to be connected to your computer
before attempting to tap another NFC device to connect.
feature is disabled.
Registering your product ensures you receive the most appropriate service and product support available. You can
as USB audio before it can be installed.
● Update your NFC-enabled Bluetooth device firmware and try the above 2 steps again.
register your product during installation or at http://www.creative.com/register.
Please note that your warranty rights are not dependent on registration.