Log:
Évaluations - 4, GPA: 3.8 ( )

Instructions Vitek, Modèle VT-4037 BN

Fabricant : Vitek
Taille : 326.07 kb
Nom Fichier :
Langue d'enseignement: ruukende
Aller à la télécharger



Facilité d'utilisation


Set the overall system volume to a minimum before making connections. 1. Open the lid of the battery compartment on the remote control unit and insert the batteries; according to proper polarity. 2. Connect the wires from the front left and right satellite speakers; the central speaker; and the rear left and right satellite speakers to the output jacks on the rear panel of the subwoofer marked FR, FL, CEN, RR, and RL. 3. Using an audio cable; connect any 2-channel audio source (CD player, for example) to the 2.1 CH INPUT jacks and any 6-channel audio source (for example, a DVD player with built-in AC-3/Dolby Digital decoder) to the 5.1 CH INPUT jacks on the subwoofer. 4. Connect the power cord to an electrical outlet and set the power switch, located on the rear panel of the subwoofer, to the ON position. Start playback on the connected audio source and use the volume control, located on the remote control unit or on the front panel of the subwoofer, to set the desired volume level. SYSTEM OPERATION A. TURNING THE POWER ON / OFF 1. Make all the necessary connections in accordance with the setup instructions before turning on the device. 2. Connect the system's power cord to an electrical outlet. (ATTENTION: The power source should conform to the device's power supply requirements). 3. Set the power switch, located on the rear panel of the device, to the ON position. Press the STANDBY button, located on the remote control unit or on the front panel of the device, to turn on the device's power. B. VOLUME 1. Press the VOL + button on the remote control unit to increase the overall system volume; the display on the front panel will show the overall volume level of the system in a numerical format. 2. Press the VOL - button on the remote control unit to decrease the overall system volume; the display on the front panel will show the overall volume level of the system in a numerical format. C. 3D SOUND MODE 1. Connect the center and rear speakers to the system. 2. Press the 3D button located on the remote control unit to turn the 3D sound on or off. D. CENTER SPEAKER 1. Press the CEN + button on the remote control unit to increase the volume level on the central speaker; the display on the front panel will show the volume level of the central speaker in a numerical format. 2. Press the CEN - button on the remote control unit to decrease the volume level on the central speaker; the display on the front panel will show the volume level of the central speakers in a numerical format. E. REAR SPEAKERS 1. Press the REAR + button on the remote control unit to increase the volume level on the rear speakers; the display on the front panel will show the volume level of the rear speakers in a numerical format. 2. Press the REAR - button on the remote control unit to decrease the volume level on the rear speakers; the display on the front panel will show the volume level of the rear speakers in a numerical format. F. FRONT SPEAKERS 1. Press the FRONT + button on the remote control unit to increase the volume level on the front speakers; the display on the front panel will show the volume level of the front speakers in a numerical format. 2. Press the FRONT -...

Ce manuel est également adapté pour les modèles :
Haut-parleurs - VT-4027 (326.07 kb)
Haut-parleurs - VT-4027-4037 (326.03 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories