Évaluations - 4, GPA: 5
(
)
)
|
Facilité d'utilisation
Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a set basement. 2. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, ruq or similar surface that may block the ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 4. Power Source The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 5. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet. 6. Cleaning The unit should be cleaned only as recommended. See the section "Care and Maintenance" of this manual for cleaning instructions. 7. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product, 8. Attachments Do not use attachments not recommended by the product manufacturer, 9. Lightning and Power Surge Protection Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and power- line surges. 10. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire of electric shock. 11. Damage Requiring Service This unit should be serviced by qualified service personnel when; A. The power supply cord or plug has been damaged. B. Objects have fallen into or liquid has been spilled into the enclosure. C. The unit has been exposed to rain. D. The unit has been dropped or the enclosure damaged, E. The unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord should be unplugged from the unit to prevent damage or corrosion. 13. Servicing The user should not attempt to service the unit beyond those methods described in the user's operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. LOCATION OF CONTROLS LOCATION OF CONTROLS DOCKING STATION: REMOTE CONTROL Front View Backside 1 Volume Rotary Knob 14 Power On/Standby 2 Speaker Charging Indicator light 15 Function button 3 Speaker 16 Menu button 4 Open button (Press to detach the Speaker from the main base) 17 Mute button 5 Skip - Button 18 Repeat button 6 Power on Indicator/Remote sensor 19 Random Button 7 Play/Pause button 20 UP button 8 Skip + Button 21 Enter button 9 iPhone/ iPod Connector 22 VOL+ Button 10 DC 9V Jack 23 VOL- Button 11 RCA Video out Jack 24 Down button 12 Aux- In Jack 13 Combination dead bolt Bottom View 3 POWER SOURCES POWER SOURCES GENERAL OPERATION Power of Main Base The main base is operated by an external AC-DC Power Adaptor with an output of 9V DC / 2000mA (included). 1. Insert the adaptor's DC output plug into the DC-IN jack on the back of the Main base 2. Plug the adaptor into a convenient AC wall outlet Power of Individual Speaker Each speaker has 1 built- in rechargeable lithium battery for independent playback. Before the first use, we recommend to charge each speaker for 4 hours. When speaker is placed on the powered base ( the main base was connected with the AC adaptor ) , charging will start automatically. The speaker charging indicator light will turn on with red color, and it will turn green once the battery is fully charged, no further charge is applied. Power of Remote Control To use the remote control, please ensure the remote control battery CR2025 (included) is installed properly and take the insulation clarity paper out. (Once you stop to use the remote control, please Insert in it same as before) . Replace the remote control battery when it stops working. It is highly recommended to use a good quality button cell. Note: Room lighting and battery life can affect the operating range of remote control. 1. Select a proper docking adaptor (enclosed when purchase an iPod) and place it into the base, no adaptor required if you use iPhone, then dock your iPod/iPhone gently. 2. Plug the AC adaptor plug into DC-IN Jack at the rear side of base, the main base will b...