Log:
Évaluations - 4, GPA: 4.5 ( )

Instructions iHome, Modèle iH70

Fabricant : iHome
Taille : 392.74 kb
Nom Fichier : d09b88ae-4faf-40b0-bf3e-173d4bd3ec57.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


4:iPod Insert iPod into dock with proper insert (iPod must not be in a skin or case). iPod will charge while docked. Press the Power button on the iH70 then press play/pause button on your iPod to play the iPod. 5:stand The iH70 has pull out “feet” (stands) on the back of each speaker for added stability. Grip the stands and pull outward for use. Press back under speaker body when not needed. 2:connections 1) Connect the left and right speaker using the included speaker cable. The arrows on the plugs should face upwards. 2) Connect the USB cable to the left speaker and a powered USB port on your computer. 3) Connect the computer audio cable to the audio out jack on your computer and to the computer jack (marked “to computer”) on the iH70 to listen to computer audio. Select the dock insert for your iPod model from the table below and place insert in dock. Never dock an iPod without an insert in place. Controls and Indicators Front Panel iPod sync mode LED Power LED Power Button Lower Volume Button iPod Dock Raise Volume Button Left Speaker Right Speaker Back Panel Side Left Left Speaker Right Speaker Speaker Panel USB Jack Headphone Jack Aux-in Jack To Computer audio Jack iPod sync Button DC Jack Right Speaker Jack To left speaker Jack Stand 2 Using iH70 Using iH70 Install AC Adaptor Connect the AC adaptor cable plug into the jack on the back of the left speaker, then plug the AC adaptor into the wall outlet. Install iPod Insert Your iH70 comes with inserts to ensure your iPod fits properly in the dock. To place an insert: 1. Select the insert for your iPod (see table on page 1). 2. Gently press the iPod insert into the dock. 3. Carefully place your iPod into the dock. The iPod must not be in a case or “skin”. Charging Your iPod Install iPod Insert Note: Please make sure you are using the correct insert for your iPod (see Install iPod Insert) and that it is properly docked into the iH70. 1. While your iPod is docked in the unit and the unit is connected to AC power, it recharges until fully charged. iPod will not be overcharged. Listening to Your iPod 1. Dock an already playing iPod and the iH70 will automatically turn on.You will hear the music playing from your iPod. Note: If the volume on the playing audio is too low on the iPod itself, the iH70 may not detect that the iPod is in play mode. Press the button on the right speaker once to play iPod. 2. When the iPod is docked and in standby mode, press the button on the iH70 then press play/pause on your iPod to play it. 3. Press play/pause on your iPod to pause play; press again to resume it. 4. Press the or buttons on the right speaker to adjust the system volume. 5. To turn off the unit, press the button on the right speaker. Your iPod will continue charging while in the dock. NOTE: IF YOU PLAY YOUR iPOD AND A COMPUTER AUDIO SOURCE AT THE SAME TIME YOU WILL HEAR BOTH Listening to Computer Audio The iH70 has two input jacks located on the back of the left speaker, a computer audio jack and an Aux in jack. Use the jack marked “to computer” to listen to audio output from your computer. If you are using an iPod without a docking port or other MP3 player/ audio device, you can play it through the iH70 via the Aux-in Jack. NOTE: DO NOT PLAY AUDIO FROM TWO SOURCES AT THE SAME TIME OR YOU WILL HEAR BOTH 1. Plug one end of the computer audio cable (included) into the headphone, speaker or line-out jack on your computer and the other end of the cable into the iH70 To Computer Jack. 2. Press the button on the right speaker to turn the iH70 on. 3. Press the or buttons on the right speaker to adjust the system volume. You may need to adjust your device volume, too. 4. To turn off the unit, press the button on the right speaker. 3 Listening to non-docking iPod or other audio devices Listening to non-docking iPod or other audio devices 1. Plug one end of an audio cable (available at into the headphone or line-out jack on your device and the other end of the patch cord into the iH70 Aux-in Jack. 2. Press the button on the right speaker to turn the iH70 on. 3. Press the or Buttons on the right speaker to adjust the system volume. You may need to adjust your device volume, too. 4. To turn off the iH70, press the button on the right speaker. Please remember to turn off your device, too. Listening to Headphones The iH70 has a headphone jack located on the left side of the left speaker. 1. Plug the end of your headphone cable into the headphone jack. 2. Adjust the volume using the or Buttons on the right speaker. NOTE: Output from the speakers is disabled when headphones are in use The iH70 allows you to sync your docked iPod with a computer directly from the iH70 without removing the iPod. 1. Plug the USB cable into a powered USB port on your computer and the other end to the iH70’s USB port located on the back of the left speaker. 2. Make sure the iPod is properly docked. Press the Sync Button located on the back of the left speaker. A green LED on the t...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories