Log:
Téléchargements : 2   Taille : 197 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

Depth 9" -1.5" = 7.5" 3) Multiply the new totals (HxWx D) Example: 10.5" x 12.5" x 7.5" = 984.375 cubic inches. 4) Next you must convert cubic inches into cubicfeet.To do this, you must divide the cubic inch total by 1728. Example 984.375^ 1728= .5696 cubicfeet. For additional information call ARC Audio Tech support at: 209-543-8706 ( , Speaker Specifications and Parameters ARC10D2 ARC10D4 ARC12D2 ARC12D4 ReVC(ln Series)- 4.030 ohms 7.810 ohms 4.040 ohms 7.88 ohms Fo- 23.375 Hz 23.48

Téléchargements : 0   Taille : 197 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

.8 cuft Optimum 1.0 cuft Max. 1.25 cuft Ported- Volume- (Gross) 1.25 cuft .9 cuft 2.0 cuft 1.3 cuft Port -(Single) Dimensions 3”(Round port) 23” (Length) 3”(Round port) 14”(Length) 3”(Round port) 13”(Length) 3”(Round port) 10”(Length) Tuning Freq. 26Hz 38Hz 26hz 36hz Sealed Box Ported Box Wiring Options Wired in Series "L Dual 2=40 j- Dual 4=80 z;:n L Dual 2=42 Dual 4=32 L Dual2=42 Dual 4=32 Wired in Parallel Dual 2=1Q Dual 4=20 Dual 2=50 Dual 4=10 Wired in Series Parallel 1

Téléchargements : 12   Taille : 197 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

All woofers make heat. It is possible to dissipate only so much of this heat.Tlie woofer can handle as much as twice its rated RMSpower for short periodsTliisistheMAXpower rating. Continued use of this woofer at greater then the RMSpower rating will result a damaged (burnt)voicecoil.Tliisdamageis considered abuse and is NCR"covered under the warranty. Small Amp Myth Under powering a woofer is fine.This woofer will suffer no damage from a 100 watt amp if it iscorrectly tuned. However, even a sm

Téléchargements : 1   Taille : 197 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

It isfor this reason that you must be able to calculate the space in which you have available in order to achieve the proper air volume required. Calculating External Vblume 1)To calculate box volume, measure the outside Width x Height x Depth of the enclosure. Example 12" x 14" x 9" = 1512 cubic inches. 2) Next you must convert cubic inches into cubicfeet.To do this, you must divide the cubic inch total by 1728. Example 1512 cu in ^1728= .875 Cubicfeet. Calculating Internal Vblume 1)To c

Téléchargements : 6   Taille : 174 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

This is the MAX power rating. Continued use of this woofer at greater then the RMS power rating will result a damaged (burnt) voice coil. This damage is considered abuse and is NOT covered under the warranty. Small Amp Myth Under powering a woofer is fine. This woofer will suffer no damage from a 100 watt amp if it is correctly tuned. However, even a small amp that is being over driven (clipped) can destroy a sub. Use your power wisely. Clipping can be heard as a dull thud or a popping sound. If

Téléchargements : 8   Taille : 174 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

The ported box design will offer more output then the sealed enclosure (about 3 - 4 dB more), but it will reduce the power handling and require more space to install. The recommended ported enclosure is not designed for “competition SPL” performance, it is designed for normal listening. It will increase the low frequencies output and increase the overall volume while still sounding good when properly tuned and installed. A Note About Power Handling ARC Audio woofers are designed to perform for y

Téléchargements : 6   Taille : 174 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

Téléchargements : 3   Taille : 174 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

To do this, you must divide the cubic inch total by 1728 . Example 1512 cu in 1728 = .875 Cubic feet. Calculating Internal Volume 1) To calculate the internal (net) volume of the above box you must first multiply the thickness of the wood you are using by Two (2). Example: ." x 2 = 1 1/2" 2) Next subtract 1.5" from each of the outside measurements of the box. Width 12" -1.5" = 10.5" . Height 14" -1.5" = 12.5" . Depth 9" -1.5" = 7.5" 3) Multiply the new totals (H x W x D) Example: 10.5" x 12.5" x

Téléchargements : 3   Taille : 174 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

Sound deaden, it will sound better and hit harder. Building an Enclosure It is recommended that you use 3/4" MDF (Medium Density Fiberboard) to build an enclosure. Glue all your joints with yellow glue and secure then with screws or nails. Make sure the enclosure will fit and that you have adequate room to get it in and out of the vehicle. Calculating Enclosure Volume It is difficult to give exact box dimensions that are universal for all cars and trucks. It is for this reason that you must be a

Téléchargements : 2   Taille : 174 kb   Fabricant : ARC Audio  
Catégorie : Haut-parleurs
@name

What does this mean? Your amp does not make power, it takes power from your battery and converts it into a different form. The subwoofer is just another kind of converter. It changes AC voltage from the amp into changes in air pressure (that's sound is) and HEAT. The more energy being converted the more heat. A speaker can not reproduce DC voltage (produced when an amp clips) but this energy must go somewhere. It is all converted into heat. This is why clipping is so dangerous to a speaker. A gr





catégories