When you load a disc into disc loading slot, the disc starts playing. If a menu appears, when playing a video disc, select the desired item. . • See (page 8) for a list of supported discs and formats. Remove a disc Press [0] (Eject) button to open the operation panel. After removing the disc, press [0] (Eject) button to close the operation panel. F Adjusts the volume B Attenuates the volume Press it again to cancel muting. A Turns power ON/OFF Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. E Sets the Loudness Press it for more than 1 second to turn the Loudness function on or off. If turned on, high and low tones are enhanced during low volume. A Switches AV OUT source Switches the source that is output at the AV OUTPUT terminal when it is pressed more than 1 second. C Switches the function screen The function control screen switches in the following order each time you press the button. Picture & Easy Control Panel Source Control Screen Picture Panel (OFF) The following buttons are always displayed on the source control screen. C 2 3 4 5 6 1 5 1Displays the Source Select screen. (page 53) 2Returns to the Source Control screen. 3Displays the Audio Control Menu screen. (page 82) 4Displays the SETUP Menu screen. (page 64) 5 Adjusts the Volume. 6 Clock display . • Touch displayed at bottom right of various screens to return to the original screen. Playing a USB device When connecting a USB device, playback starts automatically. Remove the USB device. Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to (page 39). ¤ • Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device. . • If the USB source is selected when a USB device is not connected, "No Device" is displayed. • When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed. • Make sure that the USB device is connected firmly. Switches the function screen The function control screen switches in the following order each time you press the button. Picture & Easy Control Panel Source Control Screen Picture Panel (OFF) The following buttons are always displayed on the source control screen. C 2 3 4 5 6 1 5 1Displays the Source Select screen. (page 53) 2Returns to the Source Control screen. 3Displays the Audio Control Menu screen. (page 82) 4Displays the SETUP Menu screen. (page 64) 5 Adjusts the Volume. 6 Clock display . • Touch displayed at bottom right of various screens to return to the original screen. Playing a USB device When connecting a USB device, playback starts automatically. Remove the USB device. Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to (page 39). ¤ • Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device. . • If the USB source is selected when a USB device is not connected, "No Device" is displayed. • When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed. • Make sure that the USB device is connected firmly. Next page 3 English Basic Operations SRC BA EDC F Switches the video source The video source switches in the following order each time you press the button. Built-in Disc Player TV Video iPod Rear View Camera Navigation You can also turn off the video display by pressing the button longer than 1 second. When you press the button again, the previous video display comes back on. . • The Rear view camera video is displayed when the vehicle's gear is in "Reverse". • Set the "NAVIGATION" of the (page 70) to "RGB"/"AV-IN" to display the Navigation video. D DDX7019/DDX7039 Switches the audio source The audio source is switched in the following order each time you press the button. SAT TUNER or HD Radio Build-in Disc Player USB device External Disc Player AUX EXT Navigation Standby iPod VIDEO TV Receives FM/AM broadcast. (page 30) Plays back the disc inserted in an external player, such as a CD changer (optional accessory). (page 21) Outputs a sound signal input to the external AUX terminal (optional accessory). Although nothing is played back, the clock etc are displayed. . • You cannot switch to a source that is not connected or inserted. • You can also play audio files, video files, and picture files with the Built-in Disc Player. Refer to (page 8) for the type and format of these media. • It is necessary to ...
)
