(Figure B). Step 5: Place Pad on seat and feed metal clips through the back 2 slots in the Pad, and then feed them through the slots in the booster seat (Figure C). Step 4: Be sure the clips are securely fastened under seat. Summer Infant, Inc. 582 Great Road PO Box 829 Slatersville, Rl 02876-0899 USA 1-800-268-6237 Summer Infant Europa« LTD. 20 Sparrows Herne Bushey, Hertfordshire WD231FXUK 44 (0)20 8420 4429 visit us at © 2005 Summer Infant, Inc. Colors and styles may vary. MADE IN CH

(Figure B). Step 5: Place Pad on seat and feed metal clips through the back 2 slots in the Pad, and then feed them through the slots in the booster seat (Figure C). Step 4: Be sure the clips are securely fastened under seat. Summer Infant, Inc. 582 Great Road PO Box 829 Slatersville, Rl 02876-0899 USA 1-800-268-6237 Summer Infant Europa« LTD. 20 Sparrows Herne Bushey, Hertfordshire WD231FXUK 44 (0)20 8420 4429 visit us at © 2005 Summer Infant, Inc. Colors and styles may vary. MADE IN CH

Colors and styles may vary. MADE IN CHINA. Please retain information for future reference. 11/05

DO NOT use this product until you have installed the brackets on the high chair frame. • The seat back can detach from the seat bottom if it is not completely snapped in place. DO NOT use this product until you have properly installed the seat back to the seat bottom and re-installed the restraint system properly on the seat. Kit Parts Tool needed for installation: Phillips Screwdriver (not included). WARNING CAUTION This kit contains small parts in it's unassembled state. Adult assembly is requ

• Insert a #8 x 3/4" (1,9 cm) screw (provided in this kit) through the right bracket and into the seat support. Tighten the screw with a Phillips screwdriver. Do not over-tighten. Bracket installation is now complete. • For your convenience this kit includes extra screws (just in case you misplace the screws removed in step 3). If after assembling the brackets you have extra screws, dispose of them in the garbage. 4 Seat Back Installation Instructions BACK VIEW BACK VIEW Upper Shoulder Belt Slot

3. Thread LATCH through base belt path normally used for vehicle seat belt. Make sure that LATCH is UNDER tongue on base . Belt must lay flat and not be twisted. 4. Hook Connectors to vehicle lower anchors. Pull firmly on Connectors to be sure they are attached . 5. Tighten LATCH by pushing down hard on base and pulling the adjustment belt . 6. NEVER put two LATCH connectors on one vehicle LATCH anchor unless specifically allowed by the vehicle manufacturer . 7. Test infant restraint for secure

Century DEDICATED TO QUALITY Instruction Manual Para instrucciones en Español, llamar al: 1-800-837-4044 Keep instructions for future use. 5009-11-010 11/01 \ Avoid injury or death -Read and understand this manual! Use rear-facing only! TABLE OF CONTENTS This instruction manual is for: • Vanté Newborn/Infant Car Seats With 3-Point Harness • Vanté Newborn/Infant Car Seats With 5-Point Harness Instructions for these models are the same unless otherwise noted. * before You Begin Im

to 5:00 p.m. Pacific Standard Time. Voice: (323) 582-3322 Fax: (323) 582-3108 E-mail: support@elationlighting.com Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. Please do not discard the shipping carton in the trash. Please recycle when ever possible. ©Elation Professional® -- DMX Branc

.$1.50 X = $ Locking Clip.......$2.50 Top Anchorage (Tether) Kit...............$9.99 X = $ X = $ Latch Kit ........$24.99 X = $ Instructions .......$0.00 X = $ Merchandise Total: $ Shipping and handling: Up to $25.00 ..........$5.95 $25.01 to $50.00 .......$6.95 $50.01 to $75.00 .......$8.95 $75.01 to $100.00 ......$9.95 $ $100.01 to $150.00 $10.95 $150.01 to $200.00 $11.95 $200.01 and up ........$13.95 Outside USA and Canada $ 10.00 Sales Tax: $_ (Indiana, California,Arkansas,

You must register this restraint to be reached in a recall. Fill out the registration card attached to car seat and mail today or send your name, address, and the restraint's model number and manufacturing date to: Century Products P.O. Box 551 Elverson, PA 19520-9973 or call 1-888-224-6549 For recall information: • Call the U.S Government's Auto Safety Hotline at 1-800-424-9393 (202-366-0123 in D.C. area) • • Call Century Products at 1-800-837-4044 •Safety First Check List • *Read and u