Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
button for at least 2 seconds. The title blinks in the display. 2 Press the DN g or f UP button to select the desired disc/station title. 3 Press the T.S.M. button to play the selected disc or station. The unit will automatically search for the disc or station and begin play. NOTE This function cannot be performed when using a multi- changer switching device. Erasing Disc Title (CD/CD Changer only) 1 Press the TITLE button to select the disc titling mode. Then, press and hold for at least 3 seconds. 2 Press and hold the -/J button for at least 2 seconds to activate the title scanning mode. The title in the display will blink. 3 Press the DN g or f UP button repeatedly unitl the disc title you want to erase is displayed. 4 Press and hold the -/J button for at least 2 seconds to erase the disc title displayed. 5 Press and hold the TITLE button for at least 3 seconds to cancel the disc title erasing mode. NOTE • You cannot erase a CD-TEXT. 11-EN Radio Operation BAND SOURCE Preset buttons (1 through 6) TUNE/A.ME DN gf UP F Manual Tuning 1 Press the SOURCE button until a radio frequency appears in the display. 2 Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band: > F1 > F2 > AM 3 Press the TUNE button repeatedly until "DX SEEK" and "SEEK" disappear from the display. NOTE The initial mode is DX SEEK. 4 Press the DN g or f UP button to move downward or upward one step respectively until the desired station frequency is displayed. NOTE The ST indicator appears on the display when a Stereo FM station is tuned in. D.A.P. Automatic Seek Tuning 1 Press the SOURCE button until a radio frequency appears in the display. 2 Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band: > F1 > F2 > AM 3 Press the TUNE button to illuminate the DX and SEEK indicators in the display. With the DX (Distance) mode activated, both strong and weak stations will be tuned in the Auto-Seek operation. Press again to return to the local mode. The DX indicator will turn off and the SEEK indicator will remain illuminated. Now, only strong stations will be tuned. 4 Press the DN g or f UP button to automatically seek for a station downward or upward respectively. The unit will stop at the next station it finds. Press the same button again to seek the next station. 12-EN Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold any one of the Preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks. 3 Press the Preset button into which you wish to store the station while the frequency display is blinking (within 5 seconds). The display stops blinking once the station has been memorized. The display shows the band, preset No. with a triangle (9) and station frequency memorized. 4 Repeat the procedure to store up to 5 other stations onto the same band. To use this procedure for other bands, simply select the band desired and repeat the procedure. A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, AM and D.A.P.). NOTE If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. Automatic Memory of Station Presets 1 Press the SOURCE button to select the radio mode. 2 Press the BAND button repeatedly until the desired radio band is displayed. 3 Press and hold the A. ME button for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into presets 1 to 6 buttons in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Storing into Direct Access Preset (D.A.P.) Band A combination of radio stations in any band (up to 6 stations) can be manually preset into the D.A.P. band. 1 Press the "F" button to illuminate the FUNC (Function) indicator. 2 Press the D.A.P. button until the D.A.P. indicator appears. Press the BAND button to select FM or AM. The selected band will be displayed. To memorize stations onto the D.A.P. band, follow the steps for the automatic or Manual Storing of Station Presets section above. NOTE This function can be used together with the Automatic Memory Preset. To cancel the D.A.P. mode, press the D.A.P. button. The D.A.P. indicator will turn off. 3 Press the "F" button to activate the normal mode. The FUNC indicator will turn off. NOTE Setting should be performed within 5 seconds after the "F" button is pressed. The unit will automatically return to the normal mode 5 seconds after pressing the "F" butto...
Ce manuel est également adapté pour les modèles :Unité - CDA-7965 (649.18 kb)
Unité - CDA-7864 (649.18 kb)
Unité - CDA-7862 (649.18 kb)