Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Please use common sense and practice SAFE LISTENING ! If you have any questions contact the SAS Technical Support Department at: Phone - 800 THE-TUBE * Fax - (225) 272-9844 Email - tech@bazooka.com * Website - In Canada: (604) 988 2966 15049 Florida Blvd., Baton Rouge, LA. 70819 2 SYSTEM FEATURES • 6" or 8" PURE-PISTON WOOFER • 150 WATT HIGH POWER AMP (NOS8A ONLY) • TURBO COOLED VOICE COILS • BASS REFLEX, DUCTED PORT ENCLOSURE • CORNER LOADING • COPLANAR OUTPUT • HIGH OUTPUT EFFICIENCY • MOISTURE RESISTANT ENCLOSURE AND WOOFER • MAXIMIZED SPACE EFFICIENCY • 1 YEAR WARRANTY • LARGE MAGNET FOR INCREASED POWER HANDLING SPECIFICATIONS: PASSIVE UNITS Woofer Size 6.5" (NOS6) 8" (NOS8, NOS8W, NOS8P) Voice Coil Size 1" high power./high temp. 2" high pwr./high temp. Magnet Size 20 oz. 36 oz. Frequency response* 39-1500 hz. 39-1500 hz. Efficiency* 100 dB* 102 dB* Power Handling 6-100 watts/channel 6-300 watts/channel Dimensions 18"x6.75"x8" 27.5" x 8.5" x 10" Weight 11 lbs. 23 lbs. Impedance SVC 4 ohm SVC 4 ohm SPECIFICATIONS: NOS8A Woofer Size 8" Voice Coil Size 1.5" high power./high temp. Magnet Size 28 oz. Frequency response* 39-250 hz. Efficiency** 102 dB* Power Handling 150 watts Dimensions 18.325" x 8.5" x 10" Weight 20 lbs. Impedance 4 ohms * The efficiency levels of all Bazooka subwoofer speaker systems are measured in the typical environment: In the low bass region with one watt of power. 3 raSTALLATIOra Please take time to read through this manual and plan out your installation before you begin! Locate an area in the rear of the vehicle where you would like to place the Bazooka speaker systems. The location you have selected must meet the following requirements in order for the Bazooka to be properly installed in the vehicle: 1.) The woofer (grill end) should be facing into a corner. (See vehicle placement recommendations on page 5) 2.) Ideally, there should be 2 to 4 inches between the woofer and the corner it is pointing into. 3.) The mounting area should be carefully checked to be sure that the mounting screws will not damage the gas tank, electrical wiring, fuel lines, or the spare tire during the mounting of the strap bases. 4.) Ensure that the mounting base brackets are 13" apart and square before mounting. Incorrect placement of the brackets will make final mounting difficult or impossible (See mounting on page 8). 5.) The bracket mounting bases should be screwed securely to a rigid surface that is part of, or anchored to, the structure of the vehicle. Be sure that your application meets all of these requirements before you continue the installation procedure! 4 FINISHING THE LOOK (Step 1) In order to complete the look of your subwoofer, you will need to install the included wire loom over the wire and attach the nozzle to the top of the tank. To begin, the wiring needs to be routed THROUGH the nozzle. If necessary, begin by feeding the wire through the nozzle as shown in the...
Ce manuel est également adapté pour les modèles :Unité - Bazooka Marine inspired SCUBA8 (380.69 kb)
Unité - NOS8A (380.69 kb)
Unité - NOS8P (380.69 kb)
Unité - NOS8W (380.69 kb)