Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
(In major US cities, you may be able to receive the SIRIUS signal from the SIRIUS ground repeaters, which would allow you to place the antenna away from a window if the signal is strong enough.) When you have installed the antenna in a suitable location, check the signal strength display of your SIRIUS-ready receiver to verify that you are receiving a suitable signal. (Consult the user guide of your specific receiver for instructions on how to access the signal strength display.) A minimum of 3 bars of either satellite (SAT) or terrestrial (TER) signal strength is required for consistent reception. If you are not obtaining at least three bars, try adjusting the antenna by changing the aiming in small increments to see if you can obtain better signal reception. If the tuner loses reception at times, this is indication that the antenna is not aimed in DIN CABLE TO SIRIUS-READY RECEIVER the optimal direction. Try adjusting the antenna by changing the aiming in small increments to see if you can obtain consistent signal reception. If you are having trouble locating your antenna in a place for optimal signal reception, please visit your retailer or our website for information on signal distribution accessories that let you use RG6 coax cable, your existing in-home wiring, and other technologies to connect your SC-H1 Tuner to the antenna. These other options allow for placement of the antenna with the best view of the sky regardless of the location of your SC-H1 Tuner. Wiring the SC-H1 Tuner The SC-H1 Tuner should be wired as shown in the diagram below, using the supplied DIN cable. Note that the AC Power Adapter is used only when your SIRIUS-ready receiver does not supply power to the tuner via the DIN cable connection. Also, if your SIRIUS-ready receiver does not support audio input via the DIN cable connection, then the audio output may be connected to your sound system using the RCA-type audio connections, or the optical cable link on the tuner. INDICATOR LIGHT Please consult your audio equipment manuals for the wiring connections needed for the SC-H1 Tuner to operate with your particular equipment. Activating Your SIRIUS Subscription You must activate the SC-H1 Tuner before you can begin to receive the SIRIUS Satellite Radio service. In order to activate your radio subscription, you will need the SIRIUS ID (SID) which uniquely identifies your tuner. The SID may be found on a sticker located on the SC-H1 packaging, or on the bottom of the tuner itself. The label will have printed on it a 12digit SID number. When you have located the SID, write it down in the space provided near the end of this manual. Contact SIRIUS on the Internet: https://activate.siriusradio.com/ Follow the prompts to activate your subscription, or you can also call SIRIUS toll-free at: 1-888-539-SIRIUS (1-888-539-7474). Once the subscription process is completed, your SC-H1 Tuner is ready to use. Refer to the owners manual for your SIRIUS-ready receiver for further instructions on how to use your SC-H1 Tuner. WINDOWSILL ANTENNA AUDIOOUT 8 PIN OPTICALR L DC 5V ANT AUDIO OUTPUT L/R (OPTIONAL, CABLE NOT INCLUDED) OPTICAL LINK (OPTIONAL, CABLE NOT INCLUDED) AC ADAPTER (OPTIONAL, AC ADAPTER IS USED ONLY IF POWER IS NOT SUPPLIED VIA DIN CABLE) 6 SC-H1 SIRIUS Connect Tuner Installation Guide SC-H1 SIRIUS Connect Tuner Installation Guide 7 Operation Consult the owners manual of your SIRIUS- ready receiver for operating instructions. The SC-H1 Tuner has an indicator light which provides basic status information about the tuner. When the tuner is first powered on, this light will be red to indicate the tuner is receiving power. After the initial power-on indication, the light will provide the following status information: Steady Red: Initial power-on indication. Flashing Red: Indicates that the antenna is not connected to the Tuner. Steady Amber: Indicates that the antenna is connected to the Tuner, but no signal is being received. Steady Green: Indicates that the Tuner is functioning properly and receiving a good signal. Specifications Operational Frequencies Satellite ..........................................................................2322.293/2330.207 MHz Terrestrial ....................................................................................... 2326.250MHz Power Requirements .............................................................................. 5 Volts DC Dimensions .......................................................................1” x 2.6” x 3.6” (WxHxD) 26mm x 66mm x 92mm (WxHxD) Antenna Type ......................................................................................... Windowsill Antenna Cable Length ........................................................ 21’ (single micro-cable) Connector Type .............................................................................................. SMB Audio Interface ................................................... RCA-type Stereo L/R Connect...
Ce manuel est également adapté pour les modèles :Unité - SIRIUS CONNECT 3SIR-ALP10T (555.31 kb)