Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
JJ t nnn UUflJJ “CD LOAD” will be displayed until the disc is loaded. Play starts from first track. m Note: While the disc is inserted, ” (DPX50EUC) or “DISC" (DPX30EUC) indicator will light. If you press “MODE” after the disc is ejected, the disc will be re-inserted. Stopping and Ejecting a Disc Press “ a” to stop CD play, and the disc will quietly eject from the CD slot. (During disc ejection, “CD EJECT’ will be displayed.) ' p-^ /^CAS_ïa» TBACK— _ ^_L 7 / ATT "///MONO LOC / / y' TUNE si J / ) \ Selecting a Track Press “TRACK once to go to the next track. Press repeatedly to step forward through all the tracks. Press TRACK" once to play from the beginning of the track you are listening to. Press twice to play the previous track. Press repeatedly to step backward through all the tracks. Press and hold Searching a Track Press and hold “TRACK ” or “w*« TRACK” for more than a half second to activate fast forward or reverse through a track. Release “TRACKS ” or “hmTRACK” to resume the normal CD play from that position. Repeating a Track Press R/R^ to repeat the current selection. “REP" indicator will light. REP The current selection will continue to repeat until you press R/R ► again. Random Selection Press and hold R/R^ for more than 2 seconds. “RANDOM” indicator will light. A random selection of music is played from all available tracks. RAND To turn off the random play feature, press and hold R/R^ again for more than 2 seconds. Scanning Tracks Press SCAN. The display will blink and the first 10 seconds of each track on the disc play in order. V I / n I n*n Z3 U I U*U L 7 I \ To stop scanning and continue with the current track, press SCAN again. Selecting by Track Number (Direct access) • Press a number from “1” to “6” then the corresponding track will start. • Press and hold a number from “7” to “12” (“1” to “6”) for more than one second and the corresponding track will start. Clock Basics (The clock system is 12-hours.) Press and Hold VO ¿PC / / w TUNE 4 A Initial Time Setting © Press DISP. “AdJ” is displayed. (2) Press and hold DISP again for more than 2 seconds, “12” blinks indicating the time setting mode is activated. (3) To set hours, press “vTUNE” or “TUNEa" . © Press DISP again for minute setting. © To set minutes, press “vTUNE” or “TUNEa” . Hold or “v” to change numbers rapidly. ©When you have set the time, press DISP. Hdu 0fin ■LJXJ Resetting the Time When you want to reset the time, press DISP for more than 2 seconds to activate the time setting mode. Then, repeat step (D to © above. Selecting the Clock Display Press DISP for clock display. Press DISP once again, the current audio display mode resumes. When power is turned off while the time is displayed, the clock mode remains on. When the PWR is pressed again, the system is completely. Note: Before you leave your car that has no ACC, be sure to switch power off. 14 CQ-DPX50/DPX30EUC Programmed Sound Memory (Only for CQ-DPX50EUC) Press and Hold YEfVRECEIVER HIKE O YER/RECEIVER mxE O A = ! L-ch sound source level Programmed Sound Memory Mode Selection A desired sound setting (except for VOL and ATT) can be memorized and recalled. Press SDM to select to the sound memory mode. C~m min Juuivjj Programmed Sound Memory Input • To preset sound setting, press the corresponding preset memory button (1 to 4) for more than 2 seconds at sound memory mode. rim iA/n u Juu/yjj 1 • The preset memory buttons, 5 and 6 are not valid for sound memory. Recall Programming Sound Memory • When a desireJpreset memory button is pressed in sound memory mode, the corresponding sound setting is called. rn> IM7Ï u JUUIVJi 1 Preset number The preset memory button 5 is recommended for setting • The preset memory button 6 is used to release all sound settings. To change to normal mode • Press MODE or SDM to return to the normal mode. Note: When the sound memory mode is selected but no setting is made within 5 seconds, the mode will return to the normal mode. Level Meter When power is ON, the level of sound sources, such as radio and CD, is displayed. Note:The level meter indications do not change when VOL, BAL, or other control is turned. R-ch sound source level Remote Control Unit Basics (Only for CQ-DPX50EUC) Battery Replacement (Remote Control Unit) 1. Remove the battery holder. Pull the holder by the Position В while pushing Position A in the direction indicated by the arrow. 2. Replace the battery. Set a new battery properly with the (+) side up as illustrated. 3. Insert the battery holder. Push in the holder to the full. Notes on Batteries Old batteries must immediately be removed and disposed. Battery Information: • Designated Battery: Panasonic Lithium Battery (CR2025) • Battery Life: 6 months with normal use (in normal room temperature) Lithium battery Rear view of remote control Position В Battery holder Position A Caution: Improper use of batteries may cause overh...