Évaluations - 2, GPA: 5
(
)
)
|
Photos et spécifications JVC KD-SHX751 |
Facilité d'utilisation
Time Set: Sets the timer for dimmer, [40]. Off: Cancels. On: Activates dimmer. From–To* Dimmer time Any hour – Any hour, [40] [Initial: 18:00 – 7:00] * Displayed only when “Dimmer” is set to “Time Set.” To be continued... Indications Selectable settings, [reference page] Bright 1 – 8: Adjust the display brightness to make the display indications Brightness clear and legible. [Initial: 8] Tag On: [Initial]; To show the ID3 tag display while playing MP3/WMA Tag display tracks, [17, 18, 20]. Off: Cancels. PTyStandby You can select one of the PTY codes for the PTY Standby Reception, PTY Standby [15]. [Initial: News] AF-Regn’l When the received signals from the current station become weak... Alternate frequency/ AF: [Initial]; Switches to another station (the programme may Regionalization differ from the one currently received), [16]. reception • The AF indicator lights up. AF Reg: Switches to another station broadcasting the same programme. • The REG indicator lights up. Off: Cancels (not selectable when “DAB AF” is set to “On”). TA Volume When a traffic programme (TA) is received, the volume level Traffic announcement automatically changes to the preset level. volume [Initial: 20]; 0 – 30 or 0 – 50*1 P-Search On: The receiver tunes in to another frequency broadcasting the Programme search same programme as the original preset RDS station is if the preset station signals are not sufficient. Off: [Initial]; Cancels. IF Filter Auto: [Initial]; Increases the tuner selectivity to reduce interference Intermediate noises between the stations. (Stereo effect will be lost.) frequency filter Wide: Subject to the interference noises from adjacent stations, but sound quality will not be degraded. (Stereo effect will not be lost.) ENGLISH Indications Selectable settings, [reference page] DAB AF*2 On: [Initial]; Traces the programme among DAB services and FM Alternative Frequency RDS stations, [48]. Reception • The AF indicator lights up. Off: Cancels. Announce*2 Select one of the 9 announcement types for Announcement Standby Announcement Reception. Standby Reception Travel [Initial] O Warning O News O Weather O Event O Special O Rad Inf (Radio Information) O Sports O Finance O (back to the beginning) Ext Input*3 Changer: [Initial]; To use a JVC CD changer, [18]. External input Ext Input: To use any external component other than above, [43]. Beep On: [Initial]; Activates the key-touch tone. Key-touch tone Off: Deactivates the key-touch tone. Telephone Muting1/Muting2: Select either one which mutes the sounds while Telephone muting using the cellular phone. Off: [Initial]; Cancels. • If CD or CD changer has been selected as the source, playback pauses during telephone muting. Amp Gain You can change the maximum volume level of this receiver. Amplifier gain control HighPower: [Initial]; Volume 00 – Volume 50 Low Power: Volume 00 – Volume 30 (Select this if the maximum power of the speaker is less than 52 W to avoid damaging the speakers.) Off: Deactivates the built-in amplifier. ENGLISH *1 Depends on the amplifier gain control. *2 Displayed only when the DAB tuner is connected. *3 Cannot be selected if the source is “CD-CH” or “EXT-IN.” ENGLISH 4 Enter the Time Set screen. Selecting the dimmer mode You can dim the display at night or as you set the timer. 1 Enter the PSM menu (see page 5). 2 Select “Dimmer.” 5 Adjust the dimmer time. 1 Set the dimmer start time. 3 Select a setting. Auto: Dims the display when you 2 Set the dimmer end time. turn on the headlights. \ Go to step 6. Time Set: Sets the timer for dimmer. \ Go to step 4. Off: Cancels. \ Go to step 6. On: Always dims the display. \ Go to step 6. 6 Finish the procedure. Other main functions Assigning titles to the sources You can assign titles to CDs (both in this receiver and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters CDs/CD-CH* Up to 32 characters (up to 30 discs) External components Up to 16 characters * You cannot assign a title to a CD Text or an MP3/WMA disc. 1 Select the source. • For a CD in this receiver: Insert a CD. • For CDs in the CD changer: Select “CD-CH,” then select a disc number. • For external components: Select “EXT-IN” or “LINE-IN” (see page 43). 2 Enter the TITLE menu (see page 5). 3 Assign a title. 1 Select a character set. (A – Z: upper case) (a – z: lower case) (Numbers and symbols) (Accented letters: upper case) (Accented letters: DISP lower case) 2 Select a character. • For available characters, see page 49. 3 Move to the next (or previous) character position. 4 Repeat steps 1 to 3 until you finish entering the title. 4 Finish the procedure. • To cancel the title entry without registration, press MENU. To erase the entire title In step 3 on the left... DISP ENGLISH Ex.: When you assign a title to a CD 42 ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holde...