Instructions Kenwood, Modèle DPX502
Fabricant : Kenwood Taille : 900.25 kb Nom Fichier :
Langue d'enseignement:
Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display Setting "AUX OFF" When selecting the source there’s no Auxiliary Input. "AUX ON" When selecting the source there’s Auxiliary Input. In Standby mode CD Read Setting When there is a problem with playing a CD with special format, this setting plays the CD by force. Display Setting "CD READ1" Play CD and Audio file. "CD READ2" Play CD by force. . • Some music CDs may not play even in the "CD READ2" mode. Other than Standby mode Audio Preset Memory Registering the value setup by Sound Control. The memory cannot be erased by the Reset button. 1 Setup Sound Control Refer to the following operations to setup the Sound Control. - (page 8) - (page 9) 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Audio Preset mode Push the Control knob towards up or down. Select the "A-PRESET" display. 4 Enter Audio Preset mode Press the Control knob for at least 1 second. 5 Select the Audio Preset Memory Push the Control knob towards up or down. Select the "MEMORY" display. 6 Put the Audio Preset in the memory Press the Control knob for at least 2 seconds. The "MEMORY" display blinks 1 time. 7 Exit Audio Preset mode Press the [MENU] button. . • Register 1 pair of Audio Preset Memory. You cannot register by the source. • When you press the Reset, all the sources will be the setting value which is registered. • The following items cannot be registered. Volume, Balance, Fader, Loudness, Volume offset, Dual Zone System, Rear Volume 28 | English Other than Standby mode Audio Preset Recall Recalling the sound setup registered by (page 28). 1 Select the source Press the [SRC] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Audio Preset mode Push the Control knob towards up or down. Select the "A-PRESET" display. 4 Enter Audio Preset mode Press the Control knob for at least 1 second. 5 Select the Audio Preset Recall Push the Control knob towards up or down. Select the "RECALL" display. 6 Recall the Audio Preset Press the Control knob for at least 2 seconds. The "RECALL" display blinks 1 time. 7 Exit Audio Preset mode Press the [MENU] button. . • The User memory of (page 8) is changed to the value which was recalled. • The source tone memory item of (page 8) is changed to the value which was recalled by the selected source. In Standby mode Firmware version display Displaying the firmware version with the unit. 1 Select the firmware version display mode Push the Control knob towards up or down. Select the "F/W VER" display. 2 Display the firmware version Push the Control knob towards right or left. In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards up or down. Select the "DEMO" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display Setting "DEMO ON" The Demonstration mode function is ON. "DEMO OFF" Exit Demonstration mode (Normal mode). English | 29 Basic Operations of remote control AUD VOL AUD FM/AM/+/– 2-ZONE [0] — [9] Loading and Replacing the battery Use two "AA"/ "R6"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. SRC SRC ATT ATT VOL DIRECT : This button is used when Kenwood Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. Basic operations [VOL] buttons Adjusts the volume. [SRC] button Each time you press the button, the source alternates. For the source alternating order refer to (page 7). [ATT] button Turns the volume down quickly. When the button is pressed again, the volume returns to the previous level. 2WARNING • Store unused batteries out of the reach of children. Contact a doctor immediately if the battery is accidentally swallowed. ¤ • Do not set the remote control in hot places such as on the dashboard. 30 | English Audio Control [AUD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. . • Refer to (page 8) for the operation method, such as the procedures for Audio control and others operations. Dual Zone System [2-ZONE] button Each time you press the button, "2ZON" of (page 9) is turned ON or OFF. [5]/ [.] buttons Adjusts the volume of the rear channel. The rear channel activates while the Dual Zone System is ON. In Tuner source [FM]/ [AM] buttons Selects the band. Each time you press the [FM] button, the band alternates between the FM1, FM2, and FM3 bands. [4]/ [.] buttons Tune up or down band. [0] — [9]...
)
Fabricant : Kenwood
