|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
one side. The input/output cables or wiring harness are connected Reconnect the input/output cables and/or the wiring incorrectly. harness correctly. See the section on "Connecting Cables to Terminals". The cassette tape is bad. Try playing another cassette tape. If no problem is experienced, the first tape was bad. Tape has been inserted but The tape has not been inserted correctly in the unit. Re-insert the tape. there is no sound/the unit will not go into tape mode Nothing happens when the The computer chip in the unit is not functioning normally. Press the reset button on the unit (see page 4). buttons are pressed. The sound quality is poor or The tape head is dirty. Clean the tape head, referring to the section on "Cleaning distorted. the tape head" (see page 4). A speaker cable may be pinched by a screw in the car. Check the speaker wiring. The speakers are not wired correctly. Reconnect the speaker cables so that each output terminal is connected to a different speaker. Radio reception is poor. The car antenna is not extended. Pull out the antenna all the way. The antenna control cable is not connected. Connect the cable correctly, referring to the section on "Connecting Cables to Terminals". The memory is erased when The battery cable has not been connected to the proper Connect the cable correctly, referring to the section on the ignition is turned off. terminal. "Connecting Cables to Terminals". The ignition and battery cable are incorrectly connected. Connect the cable correctly, referring to the section on "Connecting Cables to Terminals". English — 28 — Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION The TEL mute function The TEL mute cable Connect the cable not work. "Connecting Cables to The TEL mute function turns The TEL mute cable is touching Pull the TEL mute cable away even though the TEL mute car. cable is not connected. External disc control mode PROBLEM POSSIBLE CAUSE SOLUTION The disc control mode cannot No cable has been connected to the disc changer Connect the cable to the disc changer input terminal be selected. terminal on the unit. the unit. The specified disc does not The specified CD is very dirty. Clean the CD. play, but another one plays instead. The CD is upside-down. Load the CD with the labelled side up. The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. Try another disc instead. The sound skips. Something is touching the disc changer. Remove whatever is touching it. The CD is scratched or dirty. If skipping happens at the same place when the car is stopped, something is wrong with the CD. Clean the CD. The display shows that the The computer chip in the unit is not functioning normally. Press the reset button on the unit (see page 4) . changer is being played, but no sound can be heard. The specified track does not Random play or magazine random play has been selected. Turn off the random play or magazine random play function. play. Cannot play CD-R or CD-RW Finalization processing is not being conducted for CD- Conduct finalization processing with CD recorder. R/CD-RW. A non-compatible CD changer is being used to play the Use a CD changer compatible with CD-R/CD-RW to play. CD-R/CD-RW. If the following situations, consult your nearest service centre: • Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display Mode. • Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 the AUX Mode is entered when switching modes. — 29 — English Troubleshooting The following recommended EJECT No disc magazine ] Load the disc magazine No CD in the unit. ] Insert the CD. NO DISC No disc has been loaded in the ] Load a disc into the disc magazine. E-04 No disc has been loaded in the disc ] Load a disc into the disc magazine. The CD is very dirty. The CD is upside-down. ] Clean the CD and load it correctly. BLANK Nothing has been recorded on the MD. NO TRACK No tracks are recorded on the MD, although it has a NO PANEL The faceplate of the slave unit being connected to this unit ] Replace it. E-77 The unit is malfunctioning for some reason. ] Press the reset button on the unit. If the "E- 77", code does not disappear, E-99 Something is wrong with the disc magazine. Or the unit is malfunctioning ] Check the disc magazine. And then, press the reset button on the unit. If the "E- 99" code does not disappear, consult your nearest service center. HOLD The protective circuit in the unit activates when the temperature inside the automatic stopping all operation. ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature the disc starts playing again. — 30 — Specifications Specifications FM tuner section Frequency range ...............87.5 MHz Usable sensitivity (S/..................................N Quieting Sensitivity (S/...............................1.6 N...
Ce manuel est également adapté pour les modèles :Unité - KRC-179RA (524.59 kb)
Unité - KRC-179RG (524.59 kb)
Unité - KRC-25RA (524.59 kb)
Unité - KRC-25RG (524.59 kb)