Instructions Kenwood, Modèle KRC-535
Fabricant : Kenwood Taille : 564.99 kb Nom Fichier :
Langue d'enseignement:
Aller à la télécharger
Facilité d'utilisation
When it’s ON, the "ATT" indicator blinks. Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display Flat "Flat" Rock "Rock" Top 40 "Top 40" Pops "Pops" Jazz "Jazz" Easy "Easy" Scan of Flat — Easy "Scan" User memory " User" • User memory: The values set on the (page 6). • Each setting value is changed with the (page 7). First, select the speaker type with the Speaker setting. Loudness Compensating for low and high tones during low Press the [LOUD] button for at least 1 second. Each time the button is pressed for at least 1 Loudness turns ON or OFF. When it's ON, "LOUD ON" is displayed. System Q You can recall the best sound the music. 1 Select the source Press the [SRC] 2 Select the Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed switch as shown below. 4 Adjust the Audio item Press the [ 4] or [ . ] button. Adjustment Item Display Range Bass level "Bass" –8 — +8 Middle level "Middle" –8 — +8 — 6— Treble level Treble level –8 — +8 Balance "Balance" Left 15 — Right 15 Fader "Fader" Rear 15 — Front 15 Volume offset "V Offset" –8 — ±0 Volume offset: Each source's volume can be set as a difference from the basic volume. 5 Exit Audio Control mode Press the [AUD] button. Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Display Frequency Station name "SNPS" In Tape source Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [Q] button. 3 Select the Speaker type Press the [ 4] or [ . ] button. Each time the button is pressed the setting below. Speaker type Display OFF "SP OFF" For 6 & 6x9 in. speaker "SP 6*9/6inch" For 5 & 4 in. speaker "SP 5/4inch" For the OEM speaker "SP O.E.M." 4 Exit Speaker Setting Press the [Q] Information Play side & Tape counter Play side & Tape running Play side In External disc source Information Track Time Disc name Disc title Track title Display "DNPS" "D-TITLE" "T-TITLE" — 7— General features General features Switching Clock Display Switching the displayed information. Press the [CLK] button. Each time the button is pressed it switches between clock display and current source. During clock display the clock indicator is ON. Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD. 1 Receive/play the station/disc you want to attach a title to • A title can't be attached to a MD. • Disc Naming can't be done during CD text display. 2 Enter name set mode Press the [NAME.S] button for at least 2 seconds. "NAME SET" is displayed. 3 Move the cursor to the enter character position Press the [ 4] or [ . ] button. 4 Select the character type Press the [ 38] button. Each time the button is pressed the character shown below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters ( 5 Select the characters Press the [FM] Characters can be entered by using a remote with a number buttons. Example: If "DANCE" is entered. Character Button #Times pressed "D" [#3] 1 "A" [#2] 1 "N" [#6] 2 "C" [#2] 3 "E" [#3] 2 6 Repeat steps 3 through 5 and enter the name. 7 Exit name set mode Press the [NAME.S] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Memory numbers - FM: 32 stations - AM: 16 stations - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed by the same operation used to name it. Auxiliary Input Display Setting Selecting the display when this input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display. 2 Enter Auxiliary Press the [NAME. The presently — 8— 3 Select the Auxiliary input display 3 Select the Auxiliary input display Each time the button is pressed it switches through the below displays. • "AUX" • "TV" • "VCP" • "GAME" • "PORTABLE" 4 Exit Auxiliary input display setting mode Press the [NAME.S] button. When operation stops for 10 seconds, the name at that time is selected, and Auxiliary input display setting mode closes. Faceplate Angle Adjustment Press the [ANG] button for at least 1 second. • Do not apply excessive force to the faceplate. It can cause damage. • The faceplate angle cannot be adjusted during tape play. When the faceplate is kept remove open, according to the (page 21) setting, the faceplate is hidden and The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detac...
Écrivez votre propre critique du dispositif
)
