Évaluations - 3, GPA: 4.3 ( )

Fabricant : Kenwood Taille : 517.33 kb Nom Fichier : Langue d'enseignement:

When the disc/track has been selected, play will begin. The selected disc/track number blinks in the display as it is being played. 2 To change the track being heard, press the . button. Another disc/track will be selected and played. NOTE • Magazine random play is canceled when you eject the disc. • The time needed for random selection depends on the number of discs loaded in the disc magazine. The cursor blinks in the position where character input can be made. 5 Press either the 4 or . button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the . button to the right. 6 Press the FM or AM button to display the desired character. Characters that can be displayed are as follows. Alphabet (capital letters) : A~Z Numerals/characters : 0~9 @ " ‘ ` % & * + - = , . / \ < > [ ] 7 Continue steps 5 and 6 until all the characters are chosen for the name. NOTE You can enter up to 8 characters for each name. 8 Assigning Names Press the MENU button. The disc name is stored and the Presetting Disc Names mode ends. If you make no entry in a 10-second period, the name will stored with the characters input so far. NOTE Function of the KDC-4018/KDC-4018G Presetting Disc Names (DNPS) ( Function of disc changers) Store the names of discs to be displayed 1 Play the disc whose name you want NOTE This function is not available for the Disc Name Preset function. 2 Enter the menu mode Press the MENU button displayed when the 3 Press the FM or 4 Press either 4 or . button for at enter the disc • The number of discs whose names can be stored depending on the disc changer that is connected. your disc changer manual for details. • Discs are identified by their total length and another disc happens to have the same that you have already stored a name displayed for it, too. • If you want to change the name display the name, and then repeat changes. — 18 — Function of the KDC-4018/KDC-4018G Function of the KDC-4018/KDC-4018G If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. 1 Press the DNPP button on the remote. "DNPP" will appear in the display, and the disc name preset play mode is entered. The preset names/disc titles of the disc in the disc changer to which you are currently listening are successively displayed for five seconds each. In any of the units that are connected, discs that have not been disc name preset will display "NO NAME". NOTE • This function can only be used in disc changers that were manufactured or sold as of 1997. Also note that some units cannot provide a display unless the disc name preset has been made by the unit that is playing. • Discs in the disc changer that have never been played before will appear as "NO ACCES" when the disc names are When you cannot identify a disc because of the “NO display after inserting a disc magazine, try playing the disc name. Also note that "NO DISC" will be a disc has not been loaded. Rapid display (forward / reverse): Press the DISC+ or DISC– button. Pressing the DISC+ button will rapidly display the preset names/disc titles in order. Pressing the DISC– button will rapidly display the preset names/disc titles in reverse 2 When the name appears Press the OK button. The disc whose name name preset play To cancel DNPP mode: Press the DNPP button. The disc name preset play (DNPP) mode will be canceled. Function of the KDC-4018/KDC-4018G Switching Display for Discs Switch the display that appears while discs are playing. Switching Display for Discs: Each time you press the CLK button, the display during disc play switches as follows: Track time Disc name (DNPS) (only when being preset) (Function of disc changers) Disc title (Units featuring CD text/MD only) (Function of disc changers) Track title (Units featuring CD text/MD only) (Function of disc changers) Clock NOTE • You can give names to discs through the function (page 18). Note that depending on the unit, display • If you try to display the name of "NO NAME" is displayed instead. • When there is an attempt to the disc title/track title has displayed for CD and "MD. • Depending on the characters may — 19 — Menu settingsCD/External disc control features Function of the KDC-4018/KDC-4018G Menu settingsCD/External disc control features Function of the KDC-4018/KDC-4018G Text Scroll ( Function of disc changers) English This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll automatically: Press the CLK button to display the disc title or the track title. The display of the text will be scrolled repeatedly. To scroll manually: 1 Press the CLK button to display the disc title or the track title. 2 Pressing the SCRL button results in one scrolling display of the titles. NOTE • Please see the menu settings (page 20) about switching between manual scrolling and automatic scrolling. • Only units ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :