Instructions Kenwood, Modèle KDC-119S
Fabricant : Kenwood
Taille : 443.79 kb
Nom Fichier :
Langue d'enseignement:
Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
. A non-compatible CD changer is being used to play the CD-R/CDRW. . Use a CD changer compatible with CD-R/CD-RW to play. ? A CD ejects as soon as it is loaded. . The CD is upside-down. . Load the CD with the labeled side up. . The CD is quite dirty. . Clean the CD, referring to the section on (page 6). ? Can’t remove disc. . The cause is that more ACC switch was turned . The disc can only be removed switch being turned OFF. If more than 10 minutes has turn the ACC switch ON again ? The disc won’t insert. . There’s already another disc inserted. . Press the [ 0] button and remove the disc. ? Track Search can't be done. . For the albums first or last song. . For each album, Track Search can't be done in the backward direction for the first song or in the forward direction song. If the following situations, consult your nearest center: • Even though the disc changer is connected, the Disc Changer source not ON, with "AVin" showing in the display during the Changer Mode. • Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the Auxiliary input is entered when switching modes. — 22 — The messages condition. E-01: No disc magazine has The disc magazine is not . Load the disc magazine properly. No CD in the unit. . Insert the CD. E-02: No disc has been loaded in the disc . Load a disc into the disc magazine. E-04: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. The messages condition. E-01: No disc magazine has The disc magazine is not . Load the disc magazine properly. No CD in the unit. . Insert the CD. E-02: No disc has been loaded in the disc . Load a disc into the disc magazine. E-04: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. The protective temperature inside exceeds 60°C (140°. Cool down the unit by turning on the air conditioner. As the temperature falls below 60°C (140°F), the again. Discs are being exchanged in the The CD player section is not operating . Reinsert the CD. If the CD cannot be ejected display continues to flash even when the CD been properly reinserted, please switch off the power and consult your nearest service center. . Clean the CD and load it correctly. E-10: Nothing has been recorded on the MD. E-11: No tracks are recorded on the MD, although it has a title. E-12: The faceplate of the slave unit being connected to this unit has been removed. . Replace it. E-77: The unit is malfunctioning for some reason. . Press the reset button on the unit. If the "E-77" code does not disappear, consult your nearest service center. E-99: The unit is malfunctioning for some reason. . Press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. — 23 — English English Specifications FM tuner section Frequency range (200 ............87.9 MHz – 107.9 Usable sensitivity (S/N = .................... 9.3dBf (0.8 .V/75 .) Quieting Sensitivity (S/N = ............... 15.2dBf (1.6 .V/75 .) Frequency response ( ± 3 dB) .................................30 Hz – Signal to Noise ratio (MONO) ..............................................70 Selectivity ( ± 400 kHz) ....................................................... . 80 dB Stereo separation (1 kHz) ....................................................40 dB AM tuner section Frequency range (10 kHz space) ...................530 kHz – 1700 kHz Usable sensitivity (S/N = 20dB) .............................28 dB. (25 .V) CD player section Laser diode ....................................................GaAlAs ( .=780 nm) Digital filter (D/A) ......................................8 Times Over Sampling D/A Converter .......................................................................1 Bit Spindle speed...............................................500 – 200 rpm (CLV) Wow & Flutter.................................
Ce manuel est également adapté pour les modèles :
Unité - KDC-119 (443.79 kb)
Unité - KDC-2019 (443.79 kb)
Unité - KDC-2019V (443.79 kb)
Unité - KDC-217 (443.79 kb)