Évaluations - , GPA: ( )

Instructions Kenwood, Modèle KDC-309A

Fabricant : Kenwood
Taille : 604.56 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Par ce dispositif a également d'autres instructions :

Unité - KDC-309A (650.11 kb)

Unité - KDC-309A (638.63 kb)

• Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. Projections Grooves 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. English | 11 Tuner features Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob to [4] or [.]. • During reception of stereo stations the "ST" indicator is ON. Function of the KDC-W431G Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed, the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control. OFF SCAN RDM REP VOL Q AUD SET UP MENU PTY DISP ATT DIM AUTO AME SCRL + - SRC 1 - 6 AUTO/ AME Band display Frequency display Preset station number ST indicator Control knob 12 | English Tuner features Station Preset Memory Putting the station in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob to [4] or [.]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob to [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. • When the (page 22) is ON, only RDS stations are put in the memory. • When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band aren’t put in the memory. Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren’t put in the memory. Preset Tuning Calling up the stations in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Call up the station Press the desired [1] — [6] button. English | 13 RDS features Function of the KDC-W4531/W4031/W409/3031A/3031G/309A/309G Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren’t listening to the radio. Press the [TI] button. Each time the button is pressed, the Traffic information function turns ON and OFF. When it’s ON, "TI" indicator is ON. When a traffic information station isn’t being received the "TI" indicator blinks. When a traffic bulletin starts, "TRAFFIC" is displayed it and it switches to traffic information. • During reception of an AM station when the Traffic Information function is turned ON, it switches to an FM station. • During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it’s automatically the remembered volume. Receiving other traffic information stations Push the Control knob to [4] or [.]. • Traffic information station can be switched when it is on the Tuner Source or switched from the Tuner Source during the reception of the Traffic bulletin. Radio Text Scroll Scrolling the displayed radio text. Hold down on [FM] of the Control knob for at least 1 second. OFF SCAN RDM REP VOL Q AUD SET UP MENU PTY DISP ATT DIM TI AME SCRL + - SRC 1 - 6 TI PTY indicator TI indicator Control knob 14 | English RDS features Function of the KDC-W4531/W4031/W409/3031A/3031G/309A/309G PTY (Program Type) Selecting the Program Type and searching for a station. 1 Enter PTY mode Press the Control knob. During PTY mode the "PTY" indicator is ON. • This function can’t be used during a traffic bulletin or AM reception. 2 Select the Program Type Push the Control knob to [FM] or [AM]. Each time the knob is pushed, the Program Type switches as shown below. No. Program Type Display 1. Speech "SPEECH" 2. News "NEWS" 3. Current Affairs "AFFAIRS" 4. Information "INFO" 5. Sport "SPORT" 6. Education "EDUCATE" 7. Drama "DRAMA" 8. Culture "CULTURE" 9. Science "SCIENCE" 10. Varied "VARIED" 11. Pop Music "POP M" 12. Rock Music ...