? The specified disc but another one . Receive another RDS station. ? The Dimmer function doesn’t work. . The Dimmer wire isn’t connected correctly. . Check the Dimmer wire connection. ? The display color changes subtly. . This is because the temperature is different when the setting was done. . The display color condition changes subtly according.ambient temperature. Tuner source ? Radio reception is poor. . The car antenna is not extended. . Pull the antenna out all the way. . The antenna control wire is not connected. . Connect the wire correctly, referring to the section on . ? It isn't the set Traffic information sound volume. . The set sound volume is less than the tuner sound volume. . If the tuner sound volume is louder than the set sound volume,the tuner sound volume is used. Disc source ? "AUX" is displayed without achieving External disc control mode. . O-N switch is set to "O" side. . Set the switch to "N" side. . Unsupported disc changer is connected. . Connect the supported disc changer. (page 3) . The specified CD is quite . Clean the CD. . The CD is upside-down. . Load the CD with the labeled . The disc is loaded in a different slot . Eject the disc magazine and check the disc. . The disc is severely scratched. . Try another disc instead. ? The specified track will not play. . Random play or magazine random play has been selected. . Turn off random play or magazine random play. ? Track repeat, disc repeat, track scan, random play, and magazine random play start by themselves. . The setting is not canceled. . The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed. ? Cannot play CD-R or CD-RW. . Finalization processing is not being conducted for CD-R/CD-RW. . Conduct finalization processing with CD recorder. . A non-compatible CD changer is being used to play the CD-R/CDRW. . Use a CD changer compatible with CD-R/CD-RW to play. ? A CD ejects as soon as it is loaded. . The CD is upside-down. . Load the CD with the labeled side up. . The CD is quite dirty. . Clean the CD, referring to the section on (page 8). ? Can’t remove disc. . The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. . The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. — 35 — English English ? The disc won’t insert. . There’s already another disc . Press the [ 0] button and remove the ? Track Search can't be done. . For the albums first or last song. . For each album, Track Search can't be done in the backward direction for the first song or in the forward song. MP3 source ? Cannot play an MP3. . Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo. . Use a medium conforming to ISO 9660 Level 1/2, Joliet, Romeo. . The MP3 has no or invalid track name extension. . Add the ".MP3" extension to the MP3 track name. . The media is scratched or dirty. . Clean the media, referring to the section on (page 8). ? Noise or no sound generated when an MP3 is played. . The track has the MP3 track name extension while it is not an MP3. . Do not use the ".MP3" extension in non-MP3. ? Takes time before the unit starts playing MP3. . The medium contains many albums, tracks, and hierarchical levels. . The unit checks all tracks on the loaded medium first. If the medium has many tracks recorded, it may take a long time for the unit before it starts playing MP3. ? Fails to play MP3 in the intended order. . The MP3 tracks were not written by the CD writer in the order in which you wanted them to be played. . Depending on the CD writer, you may be able to set the order in which MP3 tracks are to be played by writing them onto a medium with their track names beginning with play sequence numbers such as "01" to "99". ? The sound skips when . The media is scratched . Clean the media, referring 8). . The recording condition is bad. . Record the media again or use another ? Can't display the ID3 tag information . Record is not made in conformity with the . Record in conformity with the ID 3 tag version1.? The songs in the selected folder aren’t played in Album Select mode. . There are no MP3 in the selected folder. . Make sure there’s recorded content in the MP3 media. ? The MP3 track/album search takes time. . Many tracks are recorded on the media. . When the media directory is complex, the track/album search can take time. ? The MP3 related text isn’t displayed correctly. . A character is entered that this unit can't display. . For the characters that can be used for MP3 text entry, refer to (page 6). ? The MP3 track time isn’t displayed correctly. . There are times when it isn’t displayed correctly according to the MP3 recording conditions. If the following situations, consult your nearest service center: • Even thoug...
)
