For how to select Function Control items, refer to (page 6). 2 Enter Bluetooth device deletion mode Press the Control knob for at least 1 second. '(name)' is displayed. 3 Select the Bluetooth device Turn the Control knob or push it towards up or down. 4 Delete the selected Bluetooth device Press the Control knob. Turn the Control knob to select “YES”, and then press the Control knob. 5 Exit the Bluetooth device deletion mode Press the [FNC] button. . • When a registered cell-phone is deleted, its Phone Book, log, SMS, and voice tag are also deleted. Displaying the Firmware Version Display the version of the firmware of this unit. 1 Select Bluetooth Firmware update item during Menu mode (In Standby mode) “BT F/W Update” is displayed. For how to select Function Control items, refer to (page 6). 2 Enter Bluetooth Firmware update mode Press the Control knob for at least 1 second. The firmware version appears. 3 Exit Bluetooth Firmware update mode Press the [FNC] button. . • For how to update the firmware, access our website. 24 | KDC-BT7539U Adding a voice dialing command Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags. 1 Enter voice tag mode Select “BT” > “VOICE” > “NAME”. For how to select Function Control item, refer to (page 6). 2 Search for the name to register Select the name to register with reference to 4 in (page 14). If a voice tag has already been registered for a name, “*” is displayed before the name. 3 Select a mode Push the Control knob towards right or left. Display Operation “N-REG” Register a voice tag. “N-CHK”* Play a voice tag. “N-DEL”* Delete a voice tag. “ ” Return to step 2. * Displayed only when a name for which a voice tag has been registered is selected. Select “REG”(Regist) 4 Register a voice tag (first) Press the Control knob. “Enter Voice 1” is displayed. When a beep is heard, utter a voice tag within 2 seconds. 5 Confirm the voice tag (second) Press the Control knob. “Enter Voice 2” is displayed. When a beep is heard, utter the same voice tag as that you uttered in step 4 within 2 seconds. “Completed” is displayed. 6 End registration Press the Control knob. Return to step 2. You can register another voice tag continuously. . • If your voice cannot be recognized, a message is displayed. Pressing the Control knob allows you to retry voice input. (page 39) Select “CHK”(Play) 4 Press the Control knob. Play the registered voice and return to step 2. Select “DEL”(Delete) 4 Delete a voice tag Press the Control knob. Turn the Control knob to select “YES”, and then press the Control knob. Return to step 2. Exit the voice tag mode Press the [FNC] button. . • Audio sound is not output during voice tag registration. Setting a Voice Command for Category Add a voice tag to the phone number category (type) for voice calling. 1 Enter voice tag mode Select “BT” > “VOICE” > “TYPE”. For how to select Function Control item, refer to (page 6). 2 Select the category (type) you wish to set Turn the Control knob or push it towards up or down. “General”/ “Home”/ “Office”/ “Mobile”/ “Other” 3 Press the Control knob. 4 Select a mode Push the Control knob towards right or left. Display Operation “T-REG” Register a voice tag. “T-CHK”* Play a voice tag. “T-DEL”* Delete a voice tag. “ ” Return to step 2. * Displayed only when a category (type) for which a voice tag has been registered is selected. 5 Register the category (type) by performing steps 4 to 6 in (page 25). Exit the voice tag mode Press the [FNC] button. . • Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command. English | 25 Bluetooth Setup Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Enter SMS download mode Select “BT” > “SMS” > “SMSDL”. For how to select Function Control item, refer to (page 6). 2 Start downloading Press the Control knob. “SMS Downloading” is displayed. When the downloading finishes, “Completed” is displayed. 3 Exit the SMS download mode Press the [FNC] button. . • The cell-phone must be able to transmit the SMS using Bluetooth. Setting on the cell-phone may be required. If the cell-phone does not support SMS function, the SMS download item in Function Control mode is not displayed. • When the SMS is downloaded from the cell-phone, the unopened messages in the cell-phone are opened. • The already-read and unread short messages can be respectively downloaded up to 75. SMS (Short Message Service) The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. ¤ • To prevent car accidents, the driver should not read the SMS while driving. When a new message arrives “SMS Received” is displa...
)
Log: