Log:
Évaluations - 3, GPA: 5 ( )

Instructions Kenwood, Modèle KDC-MP635

Fabricant : Kenwood
Taille : 1.21 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


20 | English Tuner features SRCFNC AUTO/AME 1 - 6 FMAM .... Control knob ST indicator Band display Preset station number Frequency display Function icon Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. Refer to (page 7). 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob towards [4] or [.]. . • During reception of stereo stations the "ST" indicator is ON. Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time you press the button, the Tuning mode alternates between the modes shown in the table below. Tuning mode Display Operation Auto seek "Seek Mode: Automatic search for a station. Auto1" Preset station seek "Seek Mode: Search in order of the stations in Auto2" the Preset memory. Manual "Seek Mode: Normal manual tuning control. Manual" English | 21 Tuner features Function of remote control Direct Access Tuning Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "– – – –" is displayed. 3 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency Press button 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (AM) [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control. Station Preset Memory Putting a station in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob towards [4] or [.]. 3 Enter Preset Memory mode Using the Control knob, select "P.MEM". For the operation method, refer to (page 10). 4 Select the number to put in the memory Turn the Control knob. 5 Determine the number to put in the memory Press the Control knob. 6 Allow the determined number to take effect Press the Control knob. Cancelling the Preset Memory mode Press the [FNC] button. . • This function can be operated with [1] — [6] button. -Press the desired [1] — [6] button for at least 2 seconds. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Recalling the stations in the memory. 1 Select the band Push the Control knob towards [FM] or [AM]. 2 Enter Preset Tuning Select mode Turn the Control knob. 3 Select a desired station in the memory Turn the Control knob. 4 Recall the station Press the Control knob. Cancelling Preset Tuning Press the [FNC] button. . • This function can be operated with [1] — [6] button. - Press the desired [1] — [6] button. 22 | English CD/USB device/Audio file/External disc control features SRCFNC S.MODE SCAN RDM/ A.RDM M.RDMREP .... Control knobRelease button IN indicator Folder number File number Play time Function icon Playing CD & Audio file When there is no disc inserted 1 Drop open the faceplate Press the Release button. 2 Insert a disc. 3 Push the faceplate on the left side, and return it to its former position. ¤ • When the faceplate has been dropped open, it might interfere with the shift lever or other vehicle function. If this happens, pay attention to safety and move the shift lever or take an appropriate action to remove the obstacle, then operate the unit. • Do not use the unit with the faceplate in the open condition. If it’s used in the open position dust can enter the inside part and cause damage. . • For the audio files and discs you can play with this unit, refer to (page 5). • When a disc is inserted, the "IN" indicator is ON. When a disc is inserted Press the [SRC] button. Select the "Compact Disc" display. Refer to (page 7). Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. Eject the disc 1 Drop open the faceplate Press the Release button. 2 Eject the disc Press the [0] button. Next page 3 English | 23 CD/USB device/Audio file/External disc control features 3 Press the faceplate on the left side, and return it to its former position. . • You can eject the disc for 10 minutes after switching off the engine. Function of KDC-X791/KDC-MP735U Playing USB (iPod) device When the USB device is not connected Connect the USB device Playback of the file contained in the USB device starts. When the USB device is connected Select USB source Press the [SRC] button. Select the "USB" (or "iPod") display. Refer to (page 7). . • For the audio files that can be played with this unit and the devices that can be connected to this unit, refer to (page 5). • The word "iPod" appearin...

Ce manuel est également adapté pour les modèles :
Unité - KDC-MP735U (1.21 mb)
Unité - KDC-X791 (1.21 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories