Évaluations - 2, GPA: 5 ( )

Fabricant : Kenwood Taille : 354.83 kb Nom Fichier : Langue d'enseignement:

• SPRM (Supreme) Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate. Supplementing is optimized by compression format (MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. • CD READ Sets the method for reading CD. When unable to play special format CD, set this function to “2” to force playing. Note that some music CD may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”. 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD. • AUX When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2: Activates the attenuator function when switched to AUX source. Turn off the attenuator function when listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal. OFF: Disables the selection of AUX source. Set to OFF when not using the AUX terminal. • NEWS (News Bulletin with Timeout Setting) Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing ”NEWS 00M” to ”NEWS 90M” turns this function ON. If news bulletin starts when this function is ON, “TRAFFIC” is displayed and news is received. If ”20M” is has been set, reception of another news bulletin will not start for 20 minutes. • AUTO1, AUTO2, MANUAL (Tuning mode select) Select a tuning mode of the radio. Tuning mode Display Operation Auto seek “AUTO1” Automatic search for a station. Preset station seek “AUTO2” Search in order of the stations in the Preset memory. Manual “MANUAL” Normal manual tuning control. • AF (Alternative Frequency) When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. • RUS (Russian language setting) When this is set to ON, the following character strings are displayed in Russian: Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT200/BT100 (optional accessory) English | 13 Appendix • OFF (Power OFF Timer) Setting the timer to turn this unit’s power OFF automatically when Standby mode continues. Using this setting can save the vehicle’s battery power. – – –: Power OFF Timer function is OFF. 20M: Turns the power OFF after 20 minutes. (Factory setting) 40M: Turns the power OFF after 40 minutes. 60M: Turns the power OFF after 60 minutes. • ICON Sets the Graphics mode of the display during normal playback condition. ON1: Turns on. ON2: Displays an animation. OFF: Turns off. For operating KCA-BT200 (optional) For operation refer to Model-A-1 in the Instruction Manual of KCA-BT200, and the table below. The [AUTO]/[TI] button should be replaced with [SRC] button for . Notation used in the KCA-BT200 Instruction Manual Operation [38] button [AUD] knob Control knob [AUD] knob [AUTO]/[TI] button [DISP] button Control knob towards up or down [FM+] or [AM–] button Control knob towards left or right [4] or [.] button For operating KCA-BT100 (optional) To control KCA-BT100, operate as follows; To make setting for , select

(page 10). Pressing the [AUD] knob for at least 1 second after selecting the "D.MODE" item allows you to enter the dialing method selection mode. To exit from dialing method selection mode, press Search button. To make , , and , press [DISP] button for at least 1 second. Moreover, some displays are different from the description of KCA-BT100 Instruction Manual. Displays of KCA-BT100 Instruction Manual Actual displays on this unit “DISCONCT” “HF D-CON” “CONNECT” “HF CON” “PHN-DEL” “DVC-DEL” “P-STATUS” “D-STATUS” “BT-CON Y” “HF-CON Y” “BT-CON N” “HF-CON N” This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” b...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :