Évaluations - 3, GPA: 3 ( )

Fabricant : Kenwood Taille : 962.02 kb Nom Fichier : Langue d'enseignement:

• Refer to the attached installation manual for the installation method of "Music Editor". • Refer to the user’s manual recorded in the installation CD-ROM and Help of "Music Editor" for the operation method of "Music Editor". • The unit can play CD/ USB device created by "Music Editor". • Information about "Music Editor" upgrade is put on the site, About Audio file • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav) (KDC-X7006U only) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device (KDC-X7006U only) USB mass storage class, iPod with KCA-iP200 • Playable USB device file system (KDC-X7006U only) FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. • Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from . to .. CD (..) ....: FFolder ....: AAudio file ..... ... ... ..... ..... ... ..... ... ..... ..... 4 | English An online manual about audio files is put on the site, On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well. . • In this manual, the word "USB device" is used for flash memories and digital audio players which have USB terminals. • The word "iPod" appearing in this manual indicates the iPod connected with the KCA-iP200 (optional accessory). The iPod connected with the KCA-iP200 can be controlled from this unit. iPods that can be connected with the KCA-iP200 are the iPod nano and the iPod with video. When an iPod is connected using a commercially available USB cable, it is handled as a mass-storage-class device. • For the supported formats and types of USB device, refer to About USB device • Install the USB device in the place where it will not prevent you from driving your vehicle properly. • You cannot connect a USB device via a USB hub. • Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. • No USB device comes with this unit. You need to purchase a commercially available USB device. • For how to play the audio files recorded in a USB device, see (page 19). • When connecting the USB device, usage of the CAU1EX (option) is recommended. Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback. About Bluetooth Hands free control Refer to the instruction manual of the Bluetooth Hands Free Box KCA-BT100 (optional accessory). About Menu operation For how to operate Menu, refer to

in this instruction manual. For the items to be set up, refer to the instruction of Hands Free Box. About display of Cell-Phone Status Cell-Phone Status is displayed in the status display of this unit. For the information about the displayed icons, refer to the instruction manual of Hands Free Box. Handling CDs • Do not touch the recording surface of the CD. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward. • When removing CDs from this unit, pull them out horizontally. • If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc. CDs that cannot be used • CDs that are not round cannot be used. • CDs with coloring on the recording surface or CDs that are dirty cannot be used. • This unit can only play the CDs with . This unit may not correctly play discs which do not have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CDRW recorder instruction manual.) English | 5 General features ATTVOL Release button FNC SRC Control knob ATT indicator Function icon Power Turning ON the Power Press the [SRC] button. . • When the power is ON, the (page 25) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source There are two types of source selection methods depending on the setting. SRC Select mode 1: 1 Press the [SRC] button. 2 Turn the Control knob or push it towards left or right. 3 Press the Control knob. SRC Select mode 2: Press the [SRC] button. Source required Display Tuner "TUNER" USB device (iPod)* "USB" ("iPod") CD "Compact Disc" TV (Optional accessory) "TV" External disc (Optional accessory) "CD Changer" Auxiliary input "AUX" Auxiliary input (Optional accessory) "AU...

Ce manuel est également adapté pour les modèles :
Unité - KDC-X7006 (962.02 kb)

Téléchargez votre

Pour télécharger, entrez 2 chiffres :