In this case, try downloading manually. To download from the cell-phone manually 1 By operating the cell-phone, end the hands-free connection. 2 By operating the cell-phone, send the phone book data to this unit By operating the cell-phone, download the phone book data to this unit. • During downloading: “Downloading” is displayed. • After completion of downloading: “Completed” is displayed. 3 By operating the cell-phone, start the hands- free connection. To clear the downloading completion message Press any button. . • Up to 1000 phone numbers can be registered for each registered cell-phone. • Up to 32 digits can be registered for each phone number along with up to 50* characters representing a name. (* 50: Number of alphabetic alphabetical characters. Fewer characters can be input depending on the type of characters.) • To cancel downloading of the phone book data, operate the cell-phone. English | 51 Function of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) Bluetooth Setup Function of KDC-X794/KDC-MP745U Adding a Voice Dialing Command Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. 1 Enter Bluetooth mode Press the [PLAY MODE] button for at least 1 second. . You can also select from “Settings” in Menu List mode. 2 Enter Phone book name edit mode Turn the [VOL] knob and press it when the desired item is displayed. Select “BT Settings” > “Voice Tag” > “PB Name Edit”. 3 Search for the name to register Select the name to register with reference to 4 in (page 26). If a voice tag has already been registered for a name, “*” is displayed before the name. 4 Select a mode Turn the [VOL] knob. Display Operation “PB Name Regist” Register a voice tag. “PB Name Check”* Play a voice tag. “PB Name Delete”* Delete a voice tag. “Return” Return to step 2. * Displayed only when a name for which a voice tag has been registered is selected. Select “PB Name Regist”(Regist) 5 Register a voice tag (first) “Enter Voice 1” is displayed. When a beep is heard, say a voice tag within 2 seconds. 6 Confirm the voice tag (second) “Enter Voice 2” is displayed. When a beep is heard, say the same voice tag as that you said in step 6 within 2 seconds. “Completed” is displayed. 7 End registration Press the [VOL] knob. Return to step 2. You can register another voice tag continuously. . • If your voice cannot be recognized, a message is displayed. Pressing the [VOL] knob allows you to retry voice input. (page 52) Select “PB Name Check”(Play) 5 Press the [VOL] knob. Play the registered voice and return to step 2. Select “PB Name Delete”(Delete) 5 Delete a voice tag Press the [VOL] knob. 6 Turn the [VOL] knob to select “YES”, and then press the [VOL] knob. Exit BT Settings mode Press the [PLAY MODE] button for at least 1 second. . • Audio sound is not output during voice tag registration. Function of KDC-X794/KDC-MP745U Setting a Voice Command for Category Add a voice tag to the phone number category (type) for voice calling. 1 Enter Bluetooth mode Press the [PLAY MODE] button for at least 1 second. . You can also select from “Settings” in Menu List mode. 2 Enter Phone Number type edit mode Turn the [VOL] knob and press it when the desired item is displayed. Select “BT Settings” > “Voice Tag” > “PN Type Edit”. 3 Select the category (type) you wish to set Turn the [VOL] knob and press it when the desired item is displayed. Select “General”, “Home”, “Office”, “Mobile”, or “Other” 4 Select a mode Turn the [VOL] knob. Display Operation “PN Type Regist” Register a voice tag. “PN Type Check”* Play a voice tag. “PN Type Delete”* Delete a voice tag. “Return” Return to step 2. * Displayed only when a name for which a voice tag has been registered is selected. 5 Register the category (type) by performing steps 5 to 7 in (page 52). 52 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U 6 Exit BT Settings mode Press the [PLAY MODE] button for at least 1 second. . • Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command. English | 53 Function of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) SMS (Short Message Service) Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button for at least 1 second. . You can also select from “Settings” in Menu List mode. 2 Enter SMS download mode Turn the [VOL] knob and press it when the desired item is displayed. Select “BT Settings” > “SMS Download”. 3 Start downloading Press the [VOL] knob. “Downloading” is displayed. When the downloading finishes, “Completed” is displayed. 4 Exit BT Settings mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button f...
)
