Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
rear speaker, F = front speaker) 1 During play, press MUTE . • [LPF] (low pass filter) range: 60 • To turn the sound back on, press 10 0, 200. MUTE again. • [MPF] (mid pass filter) range: 50 1K , 1.5K, 2.5K. • [HPF] (high pass filter) range:10 Turn Dynamic Bass Boost 12.5K, 15K, 17.5K. • [SW ON]/[SW OFF] (subwoof (DBB) on/off volume on or off ) • [SW VOL] (subwoofer volume) 1 Press DBB for 3 seconds, the current range: 0 to 15. setting is displayed: 3 Turn to select a value. » [DBB ON] : The Dynamic Bass Boost (DBB) function is on. 4 Press to confirm. » [DBB OFF] : The DBB function is off. 2 Press DBB again for 3 seconds to change the DBB setting. Select preset equalizer 1 Press EQ/Audio. » The current Equalizer setting is displayed. 2 Press EQ/Audio again repeatedly to select a preset EQ: • [USER] (user) • [FLAT] (flat) • [POP] (pop) • [TECHNO] (techno) • [ROCK] (rock) • [CL ASSIC] (classic) • [JAZZ] (jazz) • [OPTIMAL] (optimal) EN Select blackout setting You can set the screen to turn off automatically after the unit is idle for 10 or 20 seconds. 1 Press MENU/DISP for 3 seconds. 2 Turn to select a setting: • [BKO 10 S] : Turn off the screen automatically 10 seconds af ter last operation. • [BKO 20 S] : Turn off the screen automatically 20 seconds after last operation. • [BKO OFF] : Never turn off the screen. 3 Press to confirm. Turn demo mode on/off When demo mode is on, when the unit is idle for more than 2 minutes, all functions are displayed. 1 Press MENU/DISP for 3 seconds. 2 Press or repeatedly to until [DEMO] is displayed. » The screen shows current Demo mode setting. 3 Turn to select a setting: • [DEMO ON] : Turn on the demo mode. • [DEMO OFF] : Turn off the demo mode. 4 Press to confirm. 22 EN green to red or vice versa. 1 Press MENU/DISP for 3 seconds. 2 Press or repeatedly to until [KE GREEN] or [KEY RED] is displayed. 3 Turn to select a setting: • [KEY GREEN]: Backlight turns g • [KEY RED]: Backlight turns red. Select start volume Each time you turn on the unit, it can play at the last listened volume or at the preset volume 1 Press MENU/DISP for 3 seconds. 2 Press or repeatedly to until [V - LAST] or [V - ADJ] is displayed. 3 Turn to select a setting: • [V - LAST] : Each time you turn the unit, the volume remains fro previous use. • [V - ADJ] : Each time you turn o the unit, the volume is at the pr level. 4 Press to confirm. Store preset volume You can turn on the unit at a preset volum 1 Select [V - ADJ] as the star t volume 2 Press MENU/DISP for 3 seconds. 3 Press or repeatedly to until [A-VO is displayed. 4 Turn to select a value: 0 - 47. 5 Press to confirm. 1 Press MENU/DISP for3 seconds. 2 Press or repeatedly to until [BEEP ON] or [BEEP OFF] is displayed. 3 Rotate to select a setting: • [BEEP ON]: Turn on the beep sound. • [BEEP OFF]: Turn off the beep sound. 4 Press to confirm. Turn display scroll on/off For track information that is longer than the display panel: you can select to cut off the remainder of the text, or scroll to display the full text. Note • If any special characters are present in the MP3 track name or album name, it may not display correctly on the screen because these characters are not suppor ted. • Some WMA is protected by Digital Rights Management (DRM), it cannot be played on the unit. • Folders/files exceed the suppor ted limit of the unit are not displayed or played. 1 Press MENU/DISP for 3 seconds. 2 Press or repeatedly to until [ROLL ON] or [ROLL OFF] is displayed. 3 Turn to select a setting: • [ROLL ON] (scroll on): Auto scroll during play. • [ROLL OFF] (scroll off ): No auto scroll display. 4 Press to confirm. 1 Press MENU/DISP for 3 seconds. 2 Press or repeatedly until [ESP] is displayed. 3 Turn to select a setting: • [ESP 12]: select this when the ro smooth and there are few bump • [ESP 45] select this when the ro bumpy and unstable. 4 Press to confirm the selection. Reset You can reset the unit to its default setting. 1 Detach the front panel (see ‘Detach t front panel’ on page 25). 2 Press the reset button by using a bal point pen or a similar tool. » Preset adjustments such as preset channels and sound adjustments are erased. EN 24 Note If the new fuse gets • damaged again, there may be an internal malfunction. Consult your Philips dealer. Remove the unit You can remove the unit from the dashboard. 1 Detach the front panel. 2 Pull out the unit by using the removal keys. A1 A2 A3 A4 A5 A6 A7 A8 B1 B2 B3 B4 B5 B6 B7 B8 FUSE 15A 8 Additional information Detach the front panel You can detach the front panel to deter theft. 1 Press to release the panel. 2 Press the left side of the panel rightward. 3 Pull the panel towards you to detach it from the chassis. 4 Store the panel in the supplied carry case to protect it from dirt or damage. Replace fuse If the fuse is damaged, 1 Check the electric connection. 2 Buy a fuse that matches the voltage of the damaged fuse. 3 Replace the fuse. EN Note • Product information is subject to change without prior notice. Powe...