Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
7 En Section 02 Operating this unit Notes ! ! Only RDS stations are tuned in during seek tuning or BSM when AF is on. When you recall a preset station, the tuner may update the preset station with a new frequency from the station’s AF list. (This is only available when using presets on the F1 or F2 bands.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station. ! Sound may be temporarily interrupted by another program during an AF frequency search. ! AF can be turned on or off independently for each FM band. Using PI Seek If the tuner cannot find a suitable station, or reception status becomes bad, the unit automatically searches for a different station with the same programming. During the search, PI SEEK is displayed and the output is muted. Using Auto PI Seek for preset stations When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall. ! The default setting for Auto PI Seek is off. See Switching Auto PI Seek on page 11. Limiting stations to regional programming When AF is used, the regional function limits the selection of stations broadcasting regional programs. 1 Press FUNCTION to select REG. 2 Press a or b to turn the regional function on or off. Notes ! Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area). ! The preset number may disappear from the display if the tuner tunes in a regional station which differs from the originally set station. ! The regional function can be turned on or off independently for each FM band. Receiving traffic announcements TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations). 1 Tune in a TP or enhanced other network’s TP station. TP indicator lights. 2 Press TA to turn traffic announcement standby on. # To turn traffic announcements standby off, press TA again. 3 Use VOLUME to adjust the TA volume when a traffic announcement begins. The newly set volume is stored in memory and recalled for subsequent traffic announcements. 4 Press TA while a traffic announcement is being received to cancel the announcement. The tuner returns to the original source but remains in the standby mode until TA is pressed again. # You can also turn the TA function on or off in the menu that appears with the pressing of FUNCTION. Notes ! The system switches back to the original source following traffic announcement recep tion. ! Only TP and enhanced other network’s TP sta tions are tuned in during seek tuning or BSM when TA is on. 8 En Section Operating this unit 02 Built-in Player Playing a disc 1 Insert a CD into the CD loading slot. Playback will automatically start. # Be sure to turn up the label side of a disc. # After a CD has been inserted, press SOURCE to select the built-in CD player. # You can eject a CD by pressing EJECT. 2 To perform fast forward or reverse, press and hold c or d. 3 To skip back or forward to another track, press c or d. Notes ! ! Read the precautions for discs and player on page 12. If an error message such as ERROR-11 is displayed, refer to Error messages on page 12. Repeating play Repeat play lets you hear the same track over again. 1 Press FUNCTION to select RPT. 2 Press c or d to select the repeat range. DSC – Repeat all tracks TRK – Repeat the current track # If you perform track search or fast forward/reverse, repeat play is automatically cancelled. # To return to the normal display, press BAND. Playing tracks in random order Random play lets you play back tracks on the CD in a random order. 1 Press FUNCTION to select RDM. 2 Press a or b to turn random play on or off. When random play is on, RDM appears in the display. # To return to the normal display, press BAND. Scanning tracks of a CD Scan play lets you hear the first 10 seconds of each track on the CD. 1 Press FUNCTION to select SCAN. 2 Press a to turn scan play on. SCAN appears in the display. The first 10 seconds of each track is played. 3 When you find the desired track press b to turn scan play off. # If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. # After scanning of a CD is finished, normal playback of the tracks will begin again. Pausing disc playback Pause lets you temporarily stop playback of the disc. 1 Press FUNCTION to select PAUSE. 2 Press a or b to turn pause on or off. # To return to the normal display, press BAND. Audio Adjustments Using balance adjustment Fader/balance setting creates an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. 2 Press a or b to adjust fr...
Ce manuel est également adapté pour les modèles :Unité - DEH-112E (1.67 mb)