Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
5 En Section 02 Operating this unit LCD display 1 2 356798 4 1 Main display section Shows the various information such as band, play time, and other setting. ! Tuner Band and frequency are displayed. ! RDS Program service name, PTY information or frequency is displayed. ! Built-in CD Player Erapsed play time is displayed. ! Audio and initial setup Function names and setup status are dis played. 2 Preset number/track number indicator Shows the track number or preset number. ! If a track number 100 or more is selected, d on the left of the track number indicator will light. 3 AF indicator Shows when AF (alternative frequencies search) function is on. 4 TP indicator Shows when a TP station is tuned in. 5 TA indicator Shows when TA (traffic announcement standby) function is on. 6 RPT indicator Shows when repeat play is turned on. 7 LOUD indicator Appears in the display when loudness is turned on. 8 Stereo (5) indicator Shows when the selected frequency is being broadcast in stereo. 9 LOC indicator Shows when local seek tuning is on. Basic Operations Turning the unit on and selecting a source You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to page 9). % Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: Tuner—Built-in CD player Notes ! ! When no disc has been set in the unit, the source will not switch to the built-in CD player. When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off. Adjusting the volume % Use VOLUME to adjust the sound level. Turning the unit off % Press SOURCE and hold until the unit turns off. Tuner Listening to the radio 1 Press SOURCE to select the tuner. 6 En Section Operating this unit 02 2 Press BAND to select a band. Press BAND until the desired band (F1, F2 for FM or MW/LW) is displayed. 3 To perform manual tuning, briefly press c or d. 4 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. # You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button. Storing and recalling broadcast frequencies % When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. Memorized radio station frequency can be recalled by pressing the preset tuning button. # Up to 12 FM stations, 6 for each of the two FM bands, and 6 MW/LW stations can be stored in memory. # Press a or b to recall radio station frequencies. Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL. 2 Press a or b to turn local seek tuning on or off. 3 Press c or d to set the sensitivity. FM: LOCAL 1—LOCAL 2—LOCAL 3— LOCAL 4 MW/LW: LOCAL 1—LOCAL 2 The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequencies with the touch of button. ! Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6. 1 Press FUNCTION to select BSM. 2 Press a to turn BSM on. Six strongest broadcast frequencies will be stored in the order of their signal strength. # To cancel the storage process, press b. RDS Introduction of RDS operation RDS (radio data system) contains inaudible informations that helps searching of the radio stations. ! RDS service may not be provided by all sta tions. ! RDS functions such as AF and TA are only active when your radio is tuned to an RDS station. Switching the RDS display % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Program service name—PTY information— Frequency PTY (program type ID code) information is listed on page 9. # PTY information and the frequency appear on the display for eight seconds. English 7 En Section 02 Operating this unit Receiving PTY alarm broadcasts When the emergency PTY code broadcasts, the unit receives it automatically (ALARM appears). When the broadcasting ends, the system returns to the previous source. ! An emergency announcement can be can celed by pressing TA. Selecting alternative frequencies When the tuner can’t get good reception, the unit automatically search for a different station in a same network. % Press and hold TA repeatedly to turn AF (alternative frequency search) on or off. Notes ! You can also turn the AF func...
Ce manuel est également adapté pour les modèles :Unité - DEH-1920R (1.18 mb)