Évaluations - 1, GPA: 4
(
)
)
|
Facilité d'utilisation
To stop auto storing, press this button again. When the auto-storage operation is completed, it will automatically play each found station for 5 seconds. After finishing 1 loop of memory scan, it will play the first memorized station in the current band. RDS function There are the PI, PS, TP, PTY, TA, AF data. PI: Program Identification Code - for identifying code. PS: Program Service Name Broadcast - station name data expressed in alphanumerically character. TP: Traffic Program Identification - for traffic information broadcasting station. TA: Traffic Announcement Identification - showing traffic information is being transmitted or not. AF: Alternative frequencies - frequency list of broadcasting station transmitting the same program. 17 TA (Traffic Announcement) function Press TA button briefly to select the TA mode on/off. When TA mode is on ("TA" is displayed on the LCD), it will begin to seek TA station and TA SEEK will be displayed on the LCD for a while. Traffic announcement interrupts CD playback or radio listening when broadcasted. To interrupt traffic announcement, press TA button short without switching off the TA mode. The set will return to the previous operating mode. EON TA LOCAL/DISTANCE mode Press and hold TA button to select EON TA LOCAL/EON TA DISTANCE mode. The purpose of this mode is to reduce unwanted interference caused by EON TA switching due to weak signal strength, resulting in the radio being switched back to the current tuned station, or being muted. EON TA LOCAL: When the field strength level of EON linked stations is below the threshold level, the radio will not switch to that station, avoiding unnecessary interference. When EONTA LOCAL mode is selected, "EONTA LO" on numeric display is indicated for a few seconds. EON TA DISTANCE: EON TA switching will be determined by the information of the current station. When EONTA DISTANCE mode is selected, EONTA DX on numeric display is indicated for a few seconds. AF (Alternative Frequencies) function Press AF button, AF mode is selected and the state of AF switching mode is displayed by AF icon in display: Icon off: AF switching mode off. Icon on: AF switching mode on, and has RDS information. 18 Icon flashing: AF switching mode on, but RDS information is not received yet. When AF switching mode is selected, the radio checks the signal strength of AF all the time. The interval of checking time of each AF depends on the signal strength of current station, from a few minute for a strong station to a few seconds for a weak station. Every time that new AF is stronger than the current station, it switches over to that frequency for a very short time, and new frequency is displayed for 1-2 seconds. Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of normal program. REGIONAL ON/OFF mode Press and hold AF button, REGION ON/OFF mode is selected. REG ON: AF switching or PI SEEK is implemented to the station which have all PI codes are same as current station (PI CODE is checked when AF CHECK in progress) REG OFF: The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented. (PI CODE and COVERAGE AREA is not checked when AF CHECK in progress) PTY (Program Type) function Press PTY button repeatedly to select one of the following mode: PTY MUSIC group - PTY SPEECH group - PTY OFF. Selection of PTY program type in each group is made by repeatedly pressing preset buttons: Button Music group Speech group 1 POP, ROCK NEWS, AFFAIRS, INFO 2 EASY, LIGHT SPORT, EDUCATE, DRAMA 3 CLASSIC, OTHERS CULTURE, SCIENCE, VARIED 19 4 JAZZ, COUNTRY WEATHER, FINANCE, CHILDREN S NATION, OLDIES SOCIAL, RELIGION, PHONE IN б FOLK TRAVEL, LEISURE, DOCUMENT When PTY MUSIC or PTY SPEECH is on, the previous PTY program and PTY word is displayed on LCD. If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop, if desired PTY is not found, NO PTY is flashed, then return to previous normal radio and PTY word disappear. 2O Disc operations Loading a disc Turn the power on. Insert the disc with the printed side facing upward into the slot. To eject the disc, press EJECT button. Play/pause To ensure good system performance, wait until the unit finishes reading the disc information before proceeding. After inserting the disc, playback will start automatically. Press 1/PLAY/PAUSE/TOP button to go into pause mode. In pause mode, press it again to resume the playback. Press it and hold for 2 seconds to play the first track. Playing the previous/next track During disc playback press NEXT button to start next track playback. Press PREVIOUS button to move back to the beginning of the current track. Press it twice to move to the beginning of the previous track. Fast forward/fast backward playing Press and hold PREVIOUS/NEXT buttons to start fast playing in backward or forward direction. The playback will resume to norma...