Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
Press either side of (prst/disc) until the desired ensemble appears, then press (enter). Press (list) repeatedly to until the Service List appears. Press either side of (prst/disc) repeatedly until the desired service appears, then press (enter). Press (list) repeatedly until the Component List appears. Press either side of (prst/disc) until the desired component appears, then press (enter). Tip To check the name of the current component, ensemble or service, press (list) repeatedly until the respective list appears in the display. The name of the currently selected item flashes. 1 2 3 ■ 4 5 6 Changing the display item When you press (list) once, the list selected last time appears. Each time you press (list) , the list changes as follows: Automatic updating of the ensemble list When you perform the BTM function for the first time, all the ensembles available in your area are automatically stored. When you perform the BTM function again, the contents of these lists are updated in accordance with the conditions described on page 20. An ensemble is added to the respective list when it is received during Automatic Tuning or Manual Tuning but is unlisted. An ensemble is also deleted from the respective list when: • you select an ensemble from the list, but it cannot be received. • you perform Automatic Tuning or Manual Tuning to receive a listed ensemble, service, or the component, but it cannot be received. 22 Settings on the audio reception Locating a DAB service by programme type (PTY) DAB can contain multi-channel audio. You can select main or sub-channel for reception. Also, if you turn on the DRC (Dynamic Range Control) function, the dynamic range on the service which supports DRC can automatically be extended. The following items can be set: • Main/Sub - to selects channel between "Main” (main-channel) and "Sub” (subchannel). • DRC - to turn on or off the function. You can use the PTY (Programme type selection) function to tune in the programme you want. 1 While listening to a DAB programme, press (DSPL/PTY). 2 Press either side of (prst/disc) repeatedly to select the programme type. 1 While listening to a DAB programme, press (MENU). 2 Press either side of (prst/disc) repeatedly until "DRC" or "Main (or Sub)" appears. 3 Press either side of (seekams) to select the desired setting (Example: "on" or "off" ). pry Pop M The programme types appear in the order shown on the page 17. 3 Press (ENTER). 4 Press (ENTER). Note "Main (or Sub)" appears in the menu only when the unit is receiving a multi-channel programme. 23 DSP Setting the equalizer You can select an equalizer curve for five music types (Rock, Vocal, Groove, Techno, and Custom). You can store and adjust the equalizer settings for frequency and level. Selecting the equalizer curve 1 Press (source) to select a source (tape, tuner, CD, or MD). "EQ" Press (sound) repeatedly until ' appears. Each time you press (SOUND), the item changes as follows: EQ (equalizer curve) t POS (listening position) t BAL (right-left) t F (front speaker volume) t R (rear speaker volume) t VOL (volume) t EQ (equalizer curve) Ea Rock Press either side of (seek/ams) to select the desired equalizer curve. Each time you press (SEEK/AMS) , the item changes as follows: Rock Vocal Groove Techno Custom off Rock To cancel the equalizing effect, select "off.” After three seconds, the display returns to the normal playback mode. Adjusting the equalizer curve 1 Press (menu). 2 Press either side of (prst/disc) repeatedly until "EQ Tune" appears, then press (enter). Press either side of (seek/ams) to select the desired equalizer curve, then press (enter). Each time you press (seek/ams) , the item changes as follows: Rock Vocal Groove Techno Custom off Rock 4 Select the desired frequency and level O Press either side of (seek/ams) to select the desired frequency. Example: "Custom" W— » I 62 tizk— Each time you press (seek/ams) , the frequency changes as follows: 62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16.0 kHz © Press either side of (prst/disc) to adjust the desired volume level. The volume is adjustable by 1 dB steps from -12 dB to +12 dB. Example: "Custom" I + 1dBk To restore the factory-set equalizer curve, press (enter) for two seconds. 5 Press (menu) twice. When the effect setting is complete, the normal playback mode appears. 3 2 3 24 Selecting the listening position You can set a delayed time for the sound to reach the listeners from the speakers. In this way, the unit can simulate a natural sound field so that you feel as if you are in the centre of the sound field no matter where you sit in the car. Display window Centre of sound field POS All Normal setting (© + ® + ®) POS Front Front part (1 + ®) POS Front-R Right front (@) POS Front-L Left front (©) POS Rear Rear part (®) POS off Cancel 1 Press (source) to select a source (tape, tuner, CD, or MD). 2 Press (sound) r...
Ce manuel est également adapté pour les modèles :Unité - XR-C7500R (2.34 mb)