For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents....................................................................................................................................................................................2 Important safeguards....................................................................................

However it does not support the MP3 data written by the method of packet write. - The unit can not read an MP3 file that has a file extension other than ".mp3". - If you play a non- MP3 file that has the ".mp3" extension, you may hear some noise. - In this manual, we refer to what are called "MP3 file" and "folder" in PC terminology as "track" and "album", respectively. - Maximum number of directory level is 8, including the root directory. Maximum number of files and folders per disc is 256

For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents..........................................................................................................2 Important safeguards....................................................................................................3 Installation/ Connections..............................

2). Attaching the control panel 1. Insert the left side of the control panel into the main unit (pic. 3) Note: the control panel must be attached into the T-Joint. 2. Press the right side of the control panel until a "click" sound is heard. 3. Close the panel. Caution: Pic. 3 DO NOT insert the control panel from the right side. It can damage the control panel. The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it

Note: the control panel must be attached into the T-Joint. 2. Press the right side of the panel until a "click" sound is heard. Detaching the front panel 1. Press the REL button on the front panel. 2. Push the panel to the right and pull off the panel. Caution: The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks. The rear connector that connects the main unit and the control panel

And use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the control panel. 6 Connection scheme Notes: - In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce the distortion during high volume level. - Prohibit to make the conductors of auto antenna and ground touch with each other. 7 Panel controls Front panel 1. OPEN BUTTON Press it to flip down the front panel to insert or eject the disc. 2. i / ► / ^ EQ3/ ▼ MUTE

In this case, data may not be reproduced correctly. High quality CD-R or CD-RW disc is recommended. Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is required. 13 - Note that the unit may not play Tracks in the order that you wrote them to the disc. Anti-theft system This unit is equipped with a mask panel which can be detached and taken with you, helping to deter theft. Detaching the front panel 1. Press the PWR button to turn the power off. 2.

Put the button-type battery (+) mark upward into the battery holder 3. Insert the battery holder into the remote control. 8 General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RELEASE button, then press the RESET button to restore the unit to the original factory settings. Power button Press the POWER button to switch the unit on. Press it and hold for 2 seconds to turn the unit off. Note: After the u

BEEP OFF: no beep sound is heard. SEEK (for Tuner mode) 14 Select SEEK 1 or SEEK 2. Seek 1: In Radio mode rotate and hold PREV/NEXT knob. The radio will seek the next strong and clear frequency station. Repeat to seek more stations in your listening area with a strong signal. Seek 2: In Radio mode rotate and hold PREV/NEXT buttons for station search. The search will not cease until you release the knob. VOL LAST/ADJUST In this mode the unit will be turned on with the same volume level at

For details, refer to the following illustrated installation methods. DIN FRONT-MOUNT (Method A) 1. Car dashboard 2. Sleeve 3. Screw 4. Nut 5. Spring washer 6. Screw 7. Metal strap 8. Flat washer 5 1. 3. 4. 5. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix t