Log:
Trier : Nom ↑   Téléchargements   Évaluation   Taille ↑  
Téléchargements : 1   Taille : 44 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

Keyless Entry Transmitter 1 pc 2.6 x 12 screw 1 pc 2.6 x 6 screw (Batteries inside) 1 pc 2.6 x 25 screw 2. PROGRAM A KEYPAD TO THE RECEIVER You need to do the programming in order to add the keypad transmitter to the receiver. 1 2 3 Plug the receiver 18R (sold separately) into an electrical socket. Press and hold the learn button at the left hand side of the receiver. The red LED on the receiver will flash. Press the [4-digit PIN], [#] and [the assigned number of the door] within 5 seconds. The

Téléchargements : 0   Taille : 69 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

Otherwise, check if the battery is inserted properly. -The left button on the transmitter should be pressed, not the right button -If the red light on the receiver flashes when you press the left button on the transmitter, but the door opener does not respond, please ensure the red/black wire is successfully connected from the receiver to the wall mounted door control. -Ensure the wires that are previously connected to the wall mounted door control are not loose. -Ensure the code setting on the

Téléchargements : 0   Taille : 17 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

24V Operation. Holding force is 100 Lbs. Otodor DM-001 can control up to 4 units of MC-201 ( = 400 Lbs) . ES-201 Electric Strike This item only sell to the locksmiths or installers as they have experience and required skills to modify the door frame during installation. 24V Operation. Controlled by Otodor DM-001. Included are the connection wire with connectors. WB-201 Wall mount transmitter Wall mount transmitter, built in with battery Operated by 12V alkaline battery UP-500 UPS power back up 1

Téléchargements : 0   Taille : 102 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

Garage Door Transmitter (Battery inside) Mounting Visor Clip Double Bracket Sided Tape There are three buttons on transmitter G6T3, each button can be programed to control Skylink garage door receiver Smart ButtonTM GB-318 or GB-318-3 or Skylink garage door opener directly. Follow one or more instructions below in Section 2 to program transmitter G6T3 to the receiver or receivers you want to control. 2a. PROGRAM TRANSMITTER TO RECEIVER GB-318 You need to do the programming in order to add the tr

Téléchargements : 2   Taille : 88 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

INSTALLATION (CONT) Congratulations on your purchase of the Skylink® Garage Door Closer Model GT-100. Skylink® Garage Door Closer is very easy to install, and provides you with the peace of mind you have been looking for by knowing your garage door will not be left open anymore. Skylink® Garage Door Closer consists of 2 units: Garage Door MonitorTM Sensor (Battery Included) GS-101 3V Lithium battery 4 pcs 3 x 18 screws Double-sided foam tape Wall Console 2 pcs 3.5 x 25 screws Extension wires GT-

Téléchargements : 1   Taille : 59 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

This is a kit with a universal remote control and Smart ButtonTM. It is 100% compatible with all garage door openers. Simply replace the traditional wall button by the Smart ButtonTM, that’s all for the installation. In this kit, you will find the following: Rating of the transformer: 12V DC, 100mA Diameter of DC plug : 3.5mm Note: Straighten up the antenna to improve signal reception. Universal Remote Control (Battery included) If you have the multi-function wall console, do not replace the wal

Téléchargements : 0   Taille : 93 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

Plug the receiver into an electrical outlet inside the garage. The red light on the receiver should be on after being plugged into an electrical outlet. Re-connect the power cord of the Garage Door Opener. The Left button on the transmitter has been programmed to operate the receiver. Activate this button will trigger the receiver therefore opens the garage door. 2. INSTALLATION (CONT) 2 3 4 5 4. CHANGE THE OPERATION CODE FOR BOTH TRANSMITTER AND RECEIVER It is recommended to randomly set the op

Téléchargements : 0   Taille : 17 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

DM-001A Add on feature to DM-001: When the door is opened manually, the door will be closed automatically after 10 seconds to 50 seconds (depending on timer setting) . Application: A door will automatically close after being opened manually or opened by the transmitter or wall button switch (availability: upon request) DM-001B Add on feature to DM-001 and DM-001A: When manually pushing the door open approx. 1 inch, the door will continue to completely open automatically Application: Easy for whe

Téléchargements : 0   Taille : 17 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

Hollow door or Solid door: In-swing & Out-swing Left or Right. DIY-Retailer, Distributor / Dealer Public Restrooms, Senior homes & Offices. Medical, Home Health Care, Front Door, Back door or any Exterior doors. Commercial, Mall. DM-50A* DM-50B* DM-100 Opener Model DM-001+ Electromagnetic Lock Model MC-201 + Transmitter 4B-201 with AC adapter & Hardware Interior: up to 42" wide 100 Lbs. Hollow door or Solid door: In-swing & Out-swing Left or Right. DIY-Retailer, Distributor / Dealer Public Restr

Téléchargements : 0   Taille : 212 kb   Fabricant : SkyLink  
Catégorie : Portail automatique
@name

This is a kit with a universal remote control and Smart ButtonTM. In this kit, you will find the following: Remote Control (Battery included) Visor clip 1. Open up the “Easy ClipTM” and place it underneath the existing 2 wires of the wall button / wall console. 2. Ensure a pair of the wall button ribbon wires are placed properly inside the channels of the “Easy ClipTM”. NOTE: Ensure the ribbon wires are not twisted but laid flat inside the clip. If your wall button ribbon wires are not the same





catégories