Fabricant : Audiovox
Taille : 449.91 kb
Nom Fichier : AVXMTGHR1D_OM.pdf
|
Facilité d'utilisation
Be sure to leave enough slack in the monitor cables to allow the headrest to move up or down. 9) Connect all the components together (electrically) and verify proper operation of all the system functions. Wireless FM Modulator The AVXMTGHR1D is equipped with a built-in wireless FM Modulator, that allows you to listen to the DVD audio signal by tuning your vehicle’s radio to the selected frequency, (CH1 87.7MHz, (CH2 88.1MHz, CH3 88.5MHz, CH4 88.9MHz, CH5 106.7.1MHz, CH6 107.1MHz, CH7 107.5MHz, CH8 107.9MHz. This feature is accessed by using the FM transmitter buttons on the remote (FMM ON/OFF, and CHANNEL SELECT). Whenever the FM Modulator is on, broadcast reception on the vehicles radio will be poor. Switching the FM Modulator off will allow normal radio reception. NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in your headrest monitor. AVXMTGHR1D 7 AVXMTGHR1D WIRING DIAGRAM Headrest Monitor 12V+VDC Ground-Video In Yellow Audio In Right Red Audio In LeftWhite 8 Pin (M) Din Cable Red with RCA Cable (P/N 112-4149)-(1pc) Video Out Yellow Audio Out Right Red Audio Out LeftWhite 8 Pin (M) Din Cable Green with RCA Cable (P/N 112-4160)-(1pc) 8 AVXMTGHR1D AVXMTGHR1D CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) (BOTTOM VIEW) (FRONT VIEW MONITOR OPEN) AVXMTGHR1D 9 REMOTE CONTROL OPERATION NOTE: The remote control has a battery installed with a pull tab to prevent battery discharge. Remove the pull tab before attempting to use the remote. Battery Replacement 1. Remove the battery holder. 2. Insert the battery (CR2025) into the battery holder and insert the battery holder into the remote. Be sure to observe the correct polarity. 3. Align the battery holder with the remote control and push until the holder clicks. Remote Control Function Description 1 f POWER SOURCE DVD SOURCE ^ ■■@00— 3-- ■Ö0ÖO (E"TEy ("^j) ( _y-- 5-- --fe) W ^ (■>- 6-- FR PLAY FF STOP ■t«; (.►) ^ SETUP REPEAT SUBTITLE AUDIO ■oooo- 0-- ZOOM SYSTEMMENÜ DISC MENU DISPLAY o o o o- 2-- ©0(3© G)© (^3 O” • 24 ■ 23 • 22 • 21 • 20 10 AVXMTGHR1D * Function control is available on the unit and the remote control. 1. POWER (CD) Button* Press this button to turn the unit ON and OFF. 2. SOURCE Button* Each time the button is pressed, the audio I video source will change in the following sequence: DVD > AV> AUX NOTE: The USB device and the SD card can be accessed using the DVD source button. Refer to Item 26. MUTE Button Press this button to mute all the audio. Pressing the button again restores the sound to the previously set level. 4. CURSOR (ATA ►) Buttons Use these buttons to navigate the menu selection on the screen. 5. PREVIOUS (M<) Button* Press to return to the previous chapter or track. 6. FR SCAN BACKWARD («) Button Press to search in the backward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 and 32 times the normal speed. Pressing the fifth time returns to normal speed.. 7. PLAY (►) Button* Press to activate the play mode when a disc is loaded in the disc compartment,a USB memory device or a SD card is connected to the unit. 8. SETUP Button Press the DVD button and SETUP button to display the Setup Menu which allows the user to change the DVD player options such as OSD Language, Video, Rating, etc. Refer to the settings and adjustment section for more information. 9. REPEAT Button Allows the user to repeat a selected track, folder, title, chapter, or all. AVXMTGHR1D 11 10. ZOOM Button Press this button to enlarge or decrease the picture size when playing a DVD disc. Press ZOOM button DVD Plaver performs Once Enlarges the picture 2X Twice Enlarges the picture 3X 3 Times Enlarges the picture 4X 4 Times Reduces the picture 1/2 5 Times Reduces the picture 1/3 6 Times Reduces the picture 1/4 7 Times Picture is returned to original size 11. SYSTEM MENU Button Press this button to enter the system menu which contains features and options to customize the screen display and change the OSD language. 12. NUMBERButtons Allows the user to enter numbers 0 to 9 for selection of CD tracks, DVD chapters, and passwords. 13. FMM ON/OFF Button Turns the wireless FM Modulator on or off. 14. FMM CHANNEL SELECT Button Selects the wireless FM Modulator Frequency: (CH1 87.7MHz, CH2 88.1MHz, CH3 88.5MHz, CH4 88.9MHz, CH5 106.7MHz, CH6 107.1MHz, CH7 107.5MHz, CH8 107.9MHz. 15. DISC MENU Button Press this button to enter the DVD root menu. 16. DISPLAY Press to display current disc information while the disc is playing. The information displayed will be Title Elapsed, Title Remaining, Chapter Elapsed and Chapter Remaining. Pre...