Évaluations - 3, GPA: 4.3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
The Bluetooth setting menu appears. 2 Touch the desired item in the list and configure the setting. The items in the Bluetooth setting menu are as follows: “Bluetooth Connection”* Activates the Bluetooth signal: “ON,” “OFF.” Touch “Pairing >” to enter the Paring mode. “Bluetooth Initialize”* Initializes all Bluetooth-related settings. Touch “Initialize” to confirm. “Bluetooth Initialize” deletes all Bluetoothrelated settings such as phonebook data, call history, preset dial, history of connected Bluetooth devices, etc. * Cannot be configured during a handsfree call. Note For details on the setting of other Bluetooth devices, refer to their respective manuals. You can select an equalizer curve from 7 music types (“Xplod,” “Vocal,” “Edge,” “Cruise,” “Space,” “Gravity,” “Custom,” or “OFF”). 1 During reception/playback, press (HOME), then touch “Settings.” 2 Touch . The sound setting menu appears. 3 Touch “EQ7.” The options appear. 4 Touch the desired equalizer curve. The setting is complete. To cancel the equalizer curve, select “OFF.” To return to the previous display, touch . Note During USB Video playback, you cannot operate the sound adjustment while listening. Customizing the equalizer curve — EQ7 Tune The EQ7 “Custom” curve allows you to make your own equalizer settings. You can adjust the level of 7 different bands: 63 Hz, 160 Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, and 16 kHz. 1 During reception/playback, press (HOME), then touch “Settings.” 2 Touch , then “EQ7.” Set the equalizer curve to other than “OFF.” 3 Touch “Custom,” then “Tune >.” The tuning display appears. 4 Touch +/– of each frequency to adjust their levels. The level is adjustable in single steps, between –8 and +8. To restore the factory-set equalizer curve, touch “Reset.” 5 5 The setting is complete. Tip Other equalizer types are also adjustable. Adjusting the sound characteristics The sound balance between left and right speakers (“Balance”) and front and rear speakers (“Fader”) can be adjusted to your preference. You can also adjust the volume level of the subwoofer if it is connected. 1 During reception/playback, press (HOME), then touch “Settings.” 2 Touch . The sound setting menu appears. 3 Touch “Balance/Fader/Subwoofer.” The setting display appears. 4 Touch B/V/v/b to adjust the balance/ fader. The level is adjustable in single steps between –15 and +15 (Balance)/–15 and +15 (Fader). 5 Touch +/– to adjust the volume level of the subwoofer. This setting is adjustable only when a subwoofer is connected and “Subwoofer” is set to “ON” (page 50). The level is adjustable in single steps, between –6 and +6. To return to the previous display, touch . Optimizing sound for the listening position — Intelligent Time Alignment The unit can change the localization of sound by delaying the sound output from each speaker to suit your position, and simulate a natural sound field with the feeling of being in the center of it wherever you sit in the car. The options for “Listening Position” are indicated below. “Front L” (1): Front left “Front R” (2): Front right “Front” (3): Center front “All” (4): In the center of your car “Custom”: Precisely calibrated position (page 43) “OFF”: No position set 1243 You can also set the approximate subwoofer position from your listening position if: – the subwoofer is connected and “Subwoofer” is set to “ON” (page 50). – the listening position is set to “Front L,” “Front R,” “Front,” or “All.” 1 During reception/playback, press (HOME) then touch “Settings.” 2 Touch . The sound setting menu appears. 3 Touch “Listening Position.” The setting display appears. 4 Touch “Front L,” “Front R,” “Front,” or “All.” 5 Set the subwoofer position. If you select “Front L,” “Front R,” “Front,” or “All” in step 4 above, you can set the subwoofer position. Touch “Near,” “Normal,” or “Far.” The setting is complete. To customize the listening position, touch “Custom >.” If you want to restore the default setting, touch “Reset.” To cancel Intelligent Time Alignment, select “OFF.” To return to the previous display, touch . Calibrating the listening position Calibrating the listening position Intelligent Time Alignment Tune You can precisely calibrate your listening position from each speaker so that the sound delay reaches the listener more correctly. Before starting, measure the distance between your listening position and each speaker. 1 During reception/playback, press (HOME) then touch “Settings.” 2 Touch , then “Listening Position.” 3 Touch “Custom >.” The setting display appears. 4 Touch +/– of each speaker to set the distance between your listening position and the speakers. The distance is adjustable in 2 cm (13/16 in) steps, between 0 and 400 cm (0 and 13 1/10 ft). 5 Touch “OK.” The setting is complete. To restore the default setting, touch “Reset.” To return to the previous display, touch . Note The setting is applied only after “OK” is touched. Speaker configuration and volume setup Creating a virtual center speaker — CSO To fully ...