Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
KX-T1450BA ашмйЕ Panasonic Please read before use. Introduction Thank you for purchasing the Panasonic Telephone Answering System. You can use this unit to: ■ Answer calls and record messages when you cannot answer the telephone or do not want to be disturbed ■ Monitor (screen) calls ■ Record message memo By using the advanced remote-control features of this unit, you can also ■ Call in from another touch tone telephone to listen to your messages ■ Record a new Outgoing Message even when you are away from your unit ■ Leave messages while you are away from your unit We recommend that you read these Operating Instructions all the way through before you set up and use your Answering System. -Accessories •AC Adaptor............. •Telephone Cord......... •Outgoing Message Tape . •Incoming Message Tape . one one one one - 1 - Table of Contents ■r' Locations of the Controls and Connection ....................................................3 Preparation Initial Settings ............................................................................................4 Toll Saver ....................................................................................................4 Cassette Tape Installation ........................................................................5 Recording an Outgoing Message (OGM)................................................6 Setting Prior to Leaving Recording the Callers’ Messages................................ 8 Preparing the ICM Tape........................................ 8 Listening to the Recorded Messages Listening to the Messages...................................... 9 Re-playing Back All the Messages .............................. 9 Other Features Recording a Message Memo....................................10 Saving the Recorded Messages ................................11 Erasing the Recorded Messages ................................12 Monitoring the Incoming Calls ..................................12 How to Operate from a Remote Phone Setting the Remote Code ......................................13 Playing Back Messages........................................14 Playing Back Newly-Recorded Messages (Memory Playback) ......14 Rewinding/Fast Forwarding the ICM Tape while Listening to the Messages ................................15 Recording a Marker Message ..................................15 Resetting the ICM Tape for Future Messages......................16 Monitoring Room Sound........................................16 Re-recording the Outgoing Message.............................17 Skipping OGM for ICM Recording................................17 Setting/Cancelling the Answer Mode ............................18 Troubleshooting Guide ....................................................................................19 Maintenance ........................................................................................................20 Cassette Tape........................................................................................................21 Others ....................................................................................................................22 Location of the Controls and Connection OGM PLAY Button OGM Recording (REC) Button Rewind (REW) Button Fast Forward (FF) Button MEMO Button Microphone (MIC) POWER/IN USE Indicator- ANSWER/CALLS Indicator Outgoing Message (OGM) Tape RING Selector (RINGS) Recording Time (REC TIME) Selector Incoming Message (ICM) Tape ICM ERASE Button POWER ON/OFF Switch - PLAYBACK/PAUSE Button CPC Selector- To Power Outlet (AC 240 V, 50 Hz) DC Jack Telephone Line Jack VOLUME CONTROL REMOTE CODE Selector Do not connect the AC adaptor to the AC outlet before inserting the OGM and ICM tapes. (See page 6.) »For the best results, use the included telephone cord. •If you cannot connect this unit to your telephone line, consult your dealer. »Use only the included AC Adaptor. (KX-A07BA or KX-A11 BA) To telephone line jack Telephone Preparation <' Initial Settings Calling Party Control (CPC) Setting Set to “A”, (no call waiting service line) If you have call waiting service or some Incoming Messages are interrupted, set to “B”. Number of Rings •2..............The unit will answer a call on the second ring. •4..............The unit will answer a call on the fourth ring. •AUTO......See “Toll Saver” on this page. Recording Time Selector •VOX........The unit will record for as long as the caller speaks. • 1 minute.. The unit will record up to 1 minute. (1 MIN) Remote Code The remote code number is made up of 2 digits. The first digit is factory preset, and the second digit is selectable. (2 or 8) Also, refer to page 13 for your remote code setting. Toll Saver The TOLL SAVER feature lets you avoid a toll charge when you call your unit and no messages have been recorded. 1 Set the number of rings to AUTO. •If the unit does not pick...