Évaluations - 5, GPA: 3 ( )

Fabricant : Panasonic Taille : 2.11 mb Nom Fichier : Langue d'enseignement:

LBattery power is consumed whenever the handset is off the base unit or charger, even when the handset is not in use. LAfter the handset is fully charged, displaying “Charge completed”, it may be left on the base unit or charger without any ill effect on the batteries. LThe battery level may not be displayed correctly or the entire display may go blank after you replace the batteries. In this case, place the handset on the base unit or charger and let it charge for 7 hours. Battery icon Battery level 5 Fully charged 6 Medium 7 Low Flashing: needs to be recharged. For assistance, please visit Preparation Symbols used in these operating instructions Symbol Meaning { } Button name The words in the brackets indicate button names on the handset and base unit. Example: {C}, {OFF} i Proceed to the next operation. “ ” Example: “Alarm” The words in quotations indicate the menu on the display. Example: {V}/{^}: “Off” Press {V} or {^} to select “Off”. Controls Base unit A BC DEFGJIH A Speaker B {<} (REPEAT) C {>} (SKIP) D {ANSWER ON} ANSWER ON indicator E {STOP} F {ERASE} G {MESSAGE} MESSAGE indicator H VOLUME {>}{<} I {LOCATOR} J Charge contacts For assistance, please visit ABCEFGHIPAUSEPHONEBOOKOKDABCEFGHIPAUSEPHONEBOOKOKD Preparation Handset J K L M N O P Q R A Speaker B {k} (PHONEBOOK) C {MENU}{OK} D {C} (TALK) E Headset jack F {s} (SP-PHONE) G {*} (TONE) H {FLASH}{CALL WAIT} I Charge contacts J Charge indicator Ringer indicator Message indicator K Receiver L Display M {REDIAL}{PAUSE} N {OFF} O Navigator key ({^} {V} {<}{>}) P {MUTE}{CLEAR} Q {INTERCOM}{TRANSFER} R Microphone Using the navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display by pressing {^}, {V}, {<}, or {>}. Adjusting audio volume Press {^} or {V} repeatedly while talking. {^} {<} {>} {V} For assistance, please visit Preparation Display Handset display items Displayed item Meaning w Within range of the base unit LWhen flashing: Handset is searching for base unit. (out of range of base unit, handset is not registered to base unit, no power on base unit) 5 Battery level Example: [1] The handset’s extension number (example shown here: handset 1) In use Line or answering system is being used by another handset or the base unit. Setting the unit before use Display language You can select either “English” or “Espanol” as the display language. The default setting is “English”. 1 {MENU} 2 {V}/{^}: “Handset settings” i {OK} 3 {V}/{^}: “Display settings” i {OK} 4 {V}/{^}: “Change language” i {OK} 5 {V}/{^}: Select the desired setting. 6 {OK} i {OFF} Note: LHow to change from Spanish back to English: 1 {MENU} 2 {V}/{^}: “Ajuste portatil” i {OK} 3 {V}/{^}: “Ajuste pantalla” i {OK} 4 {V}/{^}: “Cambiar idioma” i {OK} 5 {V}/{^}: “English“ i{OK} i {OFF} Voice guidance language You can select either “English” or “Espanol” as the voice guidance language of the answering system. The default setting is “English”. 1 {MENU} 2 {V}/{^}: “Answering device” i {OK} 3 {V}/{^}: “Settings” i {OK} 4 {V}/{^}: “Voice prompt” i{OK} 5 {V}/{^}: Select the desired setting. 6 {OK} i {OFF} Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service. 1 {MENU} 2 {V}/{^}: “Set tel line“ i {OK} 3 {V}/{^}: “Set dial mode“ i {OK} 4 {V}/{^}: Select the desired setting. 5 {OK} i {OFF} For assistance, please visit Preparation Date and time Set the correct date and time. – To use the available alarm function (page 25). – When you play back a message from the answering system (page 28), the unit announces the day and time it was recorded. 1 {MENU} 2 {V}/{^}: “Set date & time” i {OK} 3 {V}/{^}: “Date and time“ i {OK} 4 Enter the current month, day, and year by selecting 2 digits for each. Example: August 15, 2007 {0}{8}{1}{5}{0}{7} 5 Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each. Example: 9:30 {0}{9}{3}{0} 6 Press {*} to select “AM” or “PM”. 7 {OK} i {OFF} Note: LWhen English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. LIf you make a mistake when entering the date and time, press {<}, {>}, {^}, or {V} to move the cursor, then make the correction. LThe date and time may be incorrect after a power failure. In this case, set the date and time again. For assistance, please visit Making/Answering Calls Making calls 1 Dial the phone number. LTo correct a digit, press {CLEAR}. 2 Press {C}. 3 When you finish talking, press {OFF} or place the handset on the base unit or charger. Using the speakerphone 1 Dial the phone number, and press {s}. LSpeak alternately with the other party. 2 When you finish talking, press {OFF}. Note: LUse the spea...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :