Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
It flashes when an outside call is being received. The call prohibition icon is displayed when call prohibition mode is set to on (p. 62). The phonebook icon is displayed when storing or viewing item into the handset phonebook (p. 32). The battery icon indicates the battery strength (p. 14). Characters P “Pause” is selected while dialling (p. 48). Direct call mode is ON (p. 63). [A]Answering system is ON (p.17) R is pressed while dialling. F [x]Key lock is ON (p. 48). Base Unit Display ABCDEFGHIabcdefg 1234567890123456 Icons The page/intercom icon is displayed when paging or using the intercom. It flashes when another unit pages the base unit. The talk icon is displayed when making or answering calls. It flashes when an outside call is being received. The phonebook icon is displayed when storing or viewing item into the base unit phonebook. The battery icon indicates the handset is on charging (p. 14). Characters “Pause” is selected while dialling (p. 48). P F R is pressed while dialling. Chapter Preparation Connections Plug in the AC adaptor cord and the telephone line cord to the bottom of the unit. Then connect the cords as shown. Getting Started Installing the Batteries in the Handset Install the batteries as shown, then install the handset cover. • If the rechargeable batteries are not inserted correctly, the handset will not work. 9V LINE Hook AC Adaptor To Power Outlet (AC 220—240 V, 50/60 Hz) Fasten the AC adaptor cord to prevent it from being disconnected. Telephone Line Cord To Socket 9V LINE Hook AC Adaptor To Power Outlet (AC 220—240 V, 50/60 Hz) Fasten the AC adaptor cord to prevent it from being disconnected. Telephone Line Cord To Socket • USE ONLY WITH Panasonic AC ADAPTOR PQLV1AL. • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) • If your unit is connected to a PBX which does not support Caller ID services, you cannot access those services. • The telephone will not work during a power failure. We therefore recommend you use a standard telephone and T Adaptor to connect this Digital Cordless Phone to the line. Your Panasonic sales shop can offer you more information about connection possibilities. Getting Started Battery Charge At the time of shipment, the batteries are not charged. To charge, place the handset on the base unit. Please charge the batteries for about 15 hours before initial use. During charging the battery, battery icon is as shown below. Fully charged During charging Needs to be charged (Handset display only) (Handset/base unit display) (Handset display only) (Flashing) (Flashing) You can check the present battery strength on the display. Handset display only Battery strength Fully charged High Medium Low Needs to be charged Battery icon (Flashing) (Flashing) Recharge (Handset display only) Ex. Handset display When “ ” flashes or the unit beeps every 15 seconds, recharge the batteries. Battery information Base 1 10 New Calls 12.04 15:00 After your batteries are fully charged, battery life depends on its type and usage condition. Approx. Ni-MH battery life (Included) Approx. Ni-Cd battery life (Optional)* While in use (Talk) Up to about 20 hours Up to about 10 hours (based on 800mA per hour) While not in use (Standby) Up to about 200 hours Up to about 100 hours • Battery life may be shortened depending on usage conditions, such as: — when viewing the Caller ID Caller List (p. 26) or phonebook (p. 32) — when talking in speakerphone mode (p. 20) — ambient temperature. • Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity, otherwise the batteries may not be charged properly. • If the batteries are fully charged, you do not have to place the handset on the base unit until “ ” flashes on the handset display. This will maximise the battery life. • The batteries cannot be overcharged. * Nickel Cadmium (Ni-Cd) rechargeable batteries (AA size) are available. If you replace the batteries with Ni-Cd batteries, battery type selection on the handset programming must be changed to Ni-Cd (p. 64). Basic Start-up Operations with the Handset Turning the Power ON/OFF Chapter Preparation To turn the power ON Press and hold . • After all possible configurations briefly appear, the display will change to the standby mode. A beep sounds. Standby mode on the handset # Base 110 New Calls12.05 13:58 $ % To turn the power OFF Press and hold until a long beep sounds. • The display will go blank. • The handset will not ring. & Base 1 [A] 4 Messages 12.05 13:58 • If message(s) is/are recorded, the standby mode will be shown as above. Standby mode on the base unit Greeting Only 4 Messages 0 New Calls 0 New Calls 12.05 13:58 12.05 13:58 • If “greeting only” is selected (p. 85), the display will be shown as above. # The current connected base unit number: You can select whether to display the base unit number, handset number or no display in...