An erased message remains in your mailbox until you end your current Enterprise Edge Voice Messaging session. After you erase a new or saved message, the number of new or saved messages shown on the display decreases by one. If the display shows 0 new 0 saved, you can play and retrieve your erased messages. Press PLAY or U to listen to your erased message. After you play your erased message, you have the option to save it. If you end the current session without saving the erased message, it is p

Center Prepared by USA (800) 432-6600 AT&T Product Documentation Canada (800) 255-1242 Development Department, Denver, Colorado For more detailed information on AUDIXO features, see the AUDIXO Feature Copyright 1993 AT&T Descriptions manual (585-305-203). 585-305-715, Issue 1 November 1993 For more information about AT&T documents, see the Global Business Communications Systems Publications Catalog (555-000-010). (Outside Front Cover) (Outside Back Cover) TABLE OF CONTENTS 12 Modify a Recorded P

Adjusting the Display The display contrast is controlled as follows: Note: Not all display terminals have a contrast control dial. To adjust the contrast on 1 Move the Contrast dial the display upward to increase the contrast of the display 2 Move the Contrast dial downward to decrease the contrast of the display Local Mode Displays To display time/date related information while you are on a call 1 Press Disp-Norm • Green light goes out Local mode is activated, and time, day and date

2) For many features you must lift the handset before you can use the feature. 3) Check with your System Manager to be sure this feature is administered on your voice terminal. There are no Feature Codes (such as Call Forward code or Send All Calls code) written in the appropriate blanks in this guide. See your System Manager for a list of Feature Codes for features assigned to your voice terminal. Then, write the codes in this guide. Problem Solution There’s no dial tone. 1) Check with your

Changes or corrections to the information contained in this document may be incorporated into future issues. TO ORDER COPIES OF THIS DOCUMENT Call: AT&T Customer Information Center on 800-432-6600, In Canada: 800-255-1242 or Write: AT&T Customer Information Center 2855 North Franklin Road P.O. Box 19901 Indianapolis, Indiana 46219 Order: Document No. 555-200-738 Issue 1, August 1991 For more information about AT&T documents, see Business Communications Systems Publications Catalog (555-000-0

Note: You can only use this feature if you and the called party have been assigned to the same pickup group by your System Manager. 6 Conference Allows you to add parties to a call, so that you can conduct up to a 6way conversation. (If you wish to conference more than 6 parties, call your attendant for assistance.) Use to set up time-saving conferences, or to spontaneously include a party important to a discussion. Drop/Stop Disconnects from a call without requiring you to hang up the handse

To place a call, simply press the AD button and then dial the desired list item. 13 Automatic Callback To automatically place another call to an extension that was busy, did not answer, or returned a call waiting ringback tone 1 Press Auto Callback during call attempt [confirmation tone] • Green light goes on steadily until callback is completed or canceled Note: If you send your calls to coverage after activating Automatic Callback, your callback calls will still ring at your extension

Choose a spot near an electrical outlet and a telephone jack. Your phone requires a modular telephone jack and a standard electrical outlet (110v AC). The outlet should not be controlled by a wall switch – if the switch is ever turned off, the phone will not operate properly. 2. Install the base batteries. Open the battery door on the bottom of the unit by pulling on the tab. Insert the batteries, making sure that they are in correctly, then close the door. The batteries are used to save your me

Please also read Part 1 – Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2000 Advanced American Telephones. All rights reserved. Printed in Mexico. 850002650 Issue 1AT&T 5/00 INSTALLATION 1 Connect the line cord. Plug one end of the telephone line cord into the jack labeled TEL LINE on the back of the system. Plug the other end into a phone wall jack. 2 Connect the telephone. NOTE: If you do not want to

After the beep, the system begins recording your caller’s message. A caller can leave a message up to three minutes long. If the message is longer than three minutes, or if the caller is silent for more than seven seconds, or if the system runs out of memory, the system beeps once and hangs up. Callers can skip over your announcement by pressing #. Call Screening/Intercept Set the system to answer calls, and set the volume control so you can hear the caller’s message. If you choose not to hear t