Log:
Téléchargements : 3   Taille : 466 kb   Fabricant : Kicker  
Catégorie : Avtousiliteli
@name@name

t % c Q=D(Mll @01= ■CH (u! (u) »™ Ml IE 1 32 u O -± oN) +12V GND REM E Low Level Input Fuse K Gain Controll E 12V (DC) power terminal E Low pass switch ¿6 Remote terminal Low pass cutting adjustment GND terminal S Multiplayer x1/x10 switch for Low section + Left channel terminal (+ MONO) S' Steroe Mono input selector S - Left channel terminal E EBC (External Bass Control) + Rigth channel terminal H EBC ON/OFF switch - Rigth channel terminal (- MONO) s Multiplayer

Téléchargements : 7   Taille : 721 kb   Fabricant : Kicker  
Catégorie : Avtousiliteli
@name@name

To adhere itself to the illustrations for the connections. (FR) Impédance acceptable minimale 2 ohms. Pour s'adhérer aux illustrations pour les raccordements. (IT) Minima Impedenza accettabile 2 ohm. Attenersi alle illustrazioni per i collegamenti (D) Minimaler annehmbarer Widerstand 2 Ohm. Sich die Abbildungen für die Anschlüsse befolgen. (SP) Impedancia aceptable mínima 2 ohmios. Para adherirse a las ilustraciones para las conexiones. 4or2ohm 4or2ohm Speakers output Im 4ohm or2ohm speakers

Téléchargements : 11   Taille : 343 kb   Fabricant : Kicker  
Catégorie : Avtousiliteli
@name@name@name

Amplifier Serial Number: __________________________ Installation 1. Mounting Choose a structurally sound location to mount your Kicker amplifier. Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifier. If possible, mount the amplifier in the climate-controlled passenger compartment. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifier. 2. Wiring

Téléchargements : 34   Taille : 2 mb   Fabricant : Kicker  
Catégorie : Avtousiliteli
@name@name@name@name

. as easy as 1, 2, 3 1. Mounting Choose a structurally sound location to mount your Kicker amplifier. The controls on the top of the amplifier need to be accessible for adjustment. Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifier. If possible, mount the amplifier in the climate-controlled passenger compartment. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws





catégories