Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY. X750-008 75 0 ECHO POWER EQUIPMENT (CANADA) X750 325-020 0 501 Newbold Street, London, Ontario Canada N6E 1K4 Printed in Japan 0601Lr 0067 ES RULES FOR SAFE OPERATION 1. Fatigue causes carelessness. Be more 11. Do not attempt a pruning or liming cautious before rest periods and before operation in a standing tree unless the end of your shift.specifically trained to do so. 2. Personal protective clothing required by 12. Guard against kickback. Kickback is the your safety organizations, government upward motion of the guide bar, which regulations, or your employer should be occurs when the saw chain, at the nose used; otherwise, sung fitting clothing, of the guide bar, contact an object. protective eyewear, safety footwear and Kickback can lead to dangerous loss of hand, leg and hearing protection should the chain saw. be worn. TO AVOID KICKBACK: Note: Personal protective clothing (a) Contact of the guide bar tip with any should meet the requirements object should be avoided. of applicable Standards.(b) Tip contact may cause the guide bar 3. Before fueling, servicing or transporting to move suddenly upward and your chain saw switch off the engine. To backward which may cause serious help prevent fire, restart your chain saw injury. at least 3 m from the fueling area.(c) Always use two hands when operating the chain saw. 4. When using a chain saw a fire (d) Use a firm grip, thumbs and fingers extinguisher should be available. encircling the handles. 5. When felling, keep at least 2 tree (e) Don’t overreach. lengths between yourself and your (f) Avoid cutting above shoulder height. fellow workers. (g) Follow the manufacture’s instructions for sharpening and maintenance of 6. Plan your work; assure yourself of an the saw chain. obstacle-free work area and, in the case of felling, of an escape path from the 13. When boring with the chain saw, the falling tree.initial cut should be introduced with the lower part of the nose (tip) until the hole 7. Follow instructions in your operator’s is sufficiently large so as to introduce the manual for starting the chain saw and entire nose (tip) of the guide bar. This control the chain saw with a firm grip on technique should reduce the danger of both handles when it is in operation. kickback. Keep handles dry, clean and free of oil. A chain saw should never be carried 14. A chain saw is intended for two-handed with the engine running.use. Serious injury to the operator, helpers and/or bystanders may result 8. When transporting your chain saw, use from one-handed operation. the appropriate transportation covers that should be available for the guide CAUTION bar and saw chain.A. Allow your chain saw to cool before refueling, and do not smoke while 9. Never operate a chain saw that is refueling. damaged, improperly adjusted, or is not completely and securely assembled. Be B. Do not allow other persons or animals sure that the saw chain stops moving close to running chain saw or close to when the throttle control trigger is where a tree is being felled. released. Never adjust the guide bar or C. Use extreme caution when cutting small saw chain when the engine operating. size brush and saplings because 10. Beware of carbon monoxide poisoning. slender material may catch the saw Operate the chain saw in well-ventilated chain and be whipped toward you. areas only. D. When cutting a limb that is under tension is alert for spring-back. Copyright © 2005 All Rights Reserved. CS-370 2 CONTENTS RULES FOR SAFE OPERATION ............................................................................. 2 NOMENCLATURE OF PARTS ................................................................................. 4 OPERATOR SAFETY............................................................................................... 6 CORRECT USE OF CHAIN BRAKE ........................................................................ 7 PREPARATION FOR USE ....................................................................................... 8 FUEL AND LUBRICANT .......................................................................................... 10 OPERATION ............................................................................................................ 11 CUTTING INSTRUCTION ........................................................................................ 14 MAINTENANCE AND CARE.................................................................................... 19 SETTING THE SAW CHAIN..................................................................................... 22 CHAIN AND GUIDE BAR COMBINATION ............................................................... 24 SERVICE GUIDE ..................................................................................................... 25 TROUBLESHOOTING ............................................................................................. 26 STORAGE AFTER USE ..........................