Log:
Évaluations - 2, GPA: 3.5 ( )

Instructions Desa, Modèle M12510US, M15012US, M15014US, M15014AS, M30016US, M30016AS, M30016AW, M30016UW, M35016US, M35016AW

Fabricant : Desa
Taille : 3.52 mb
Nom Fichier : 113005-01D.pdf
Langue d'enseignement: enesfr
Aller à la télécharger



Facilité d'utilisation


Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated. See pages 62 through 64 for an Illustrated Parts List. If you need additional referral information, contact our Technical Service Department (see Technical Service). In Canada call 1-800-561-3372 for parts information. REPAIR SERVICE Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty. Each Authorized Service Center is independently owned and operated. WARRANTY SERVICE If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty. NON-WARRANTY SERVICE If product requires service, return it to nearest Authorized Service Center. Repairs will be billed to you at regular repair list prices. For additional Service Center or warranty information, call 1-800-858-8501 or visit our Technical Service web site at ENGLISH 113005 17 TROUBLESHOOTING WARNING: Unplug chain saw from Note: For additional help, visit DESA Power power source before servicing. Severe Tools’™ technical service web site at injury or death could occur from electrical shock or body contact with moving chain. OBSERVED FAULT POSSIBLE CAUSE REMEDY Saw runs, but does not cut Chain assembled backwards on guide See Assembly, pages 7 and 8 bar Saw does not cut unless heavily Chain is dull See Sharpening Saw Chain, pages forced. Cutting produces only saw-15 and 16 dust with few large chips Saw runs slow. Saw stalls easily Motor of saw does not run when you squeeze trigger Low power supply voltage 1. Switch lockout not pushed forward in to release trigger 2. Extension cord connections loose 3. Open line fuse or circuit breaker 4. Worn out motor brushes 5. Open wiring circuit on saw Extension cord wire size too small. See Extension Cords, page 10 1. Push switch lockout forward before squeezing trigger 2. Check cord connections 3. Check line fuse or circuit breaker 4. See authorized service center 5. See authorized service center Motor of saw runs, but chain does Gear train failure See authorized service center not move Chain does not get oil 1. Clogged oil slot in guide bar 1. Remove guide bar and clean oil slot 2. Oil is too thick 2. Use correct weight of oil. See Filling Oil Tank, page 9 Chain comes off guide bar 1. Chain is loose 1. Tighten chain. See Saw Chain Tension Adjustment, pages 8 and 9 2. Guide bar and chain not as-2. See Assembly, pages 7 and 8 sembled correctly Saw smokes Saw damaged. Do not use saw See authorized service center Saw leaks oil Oil cap is not secure Tighten oil cap. Note: Empty oil tank when not in use 113005 18 WARRANTY INFORMATION Model ___________________________ Date Purchased ___________________ ELECTRIC CHAIN SAW LIMITED WARRANTY Always specify model and serial numbers when writing the factory. We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty. We make no other warranty, expressed or implied. DESA Specialty Products™ warrants this electric chain saw and any parts thereof, to be free from defects in material and workmanship for one year (90 days for reconditioned unit) from the date of first purchase from an authorized dealer, provided that the product has been properly maintained and operated in accordance with all applicable instructions. The bill of sales or proof of purchase must be presented at the time a claim is made under this warranty. This warranty is extended only to the original retail purchaser. This warranty covers only the parts and labor required to restore this chain saw to its proper operating condition. Warranty parts must be obtained through factory authorized dealers and service centers for this product. These dealers and service centers will provide original factory replacement parts. Failure to use original factory replacement parts voids this warranty. This warranty does not cover commercial, industrial, or rental usage, nor does it apply to parts that are not in original condition because of normal wear and tear, or parts that fail or become damaged as a result of misuse, accident, lack of proper maintenance, tampering, or alteration. Travel, handling, transportation, and incidental costs associated with warranty repairs are not reimbursable under this warranty and are the responsibility of the owner. To the full extent allowed by the law of the jurisdiction that governs the sale of the product, this express warranty excludes any and all other expressed warranties and limits the duration of any and all implied warranties, including warranties of merchantability and fitness for a particular purpose to one year from the date of f...

Ce manuel est également adapté pour les modèles :
Benzo et scies - M12510US, M15012US, M15014US, M15014AS, M30016US, M30016AS, M30016AW, M30016UW, M35016US, M35016AW (3.52 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories